Skip to main navigation Skip to search Skip to main content

Digitaler Zwillingsprototyp für Softwaretests
: Konzeption und Integration in eine bestehende Maschinensteuerungsarchitektur

  • Gerald Birklbauer

    Student thesis: Master's Thesis

    Abstract

    This master’s thesis examines how a digital twin prototype can be integrated into a
    novel machine control architecture for a CNC machine tool and leveraged for automated
    software testing. The focus lies on the feasibility of such integration and the types of
    test cases that can be executed automatically on the digital twin prototype.
    Initially, this thesis explains the approach, which is based on the Design Science
    Research (DSR) research methodology, with the theoretical foundation of the digital
    twin being developed using a structured literature review. Subsequently, the relevant
    framework conditions, especially the machine control architecture and existing software
    applications, are presented. Requirements and test case categories are derived from a
    test case catalogue, resulting in the definition of three representative test cases. Based
    on these, six integration concepts are developed, compared and evaluated. The protocol
    independent Software-in-the-Loop (SIL) control concept was selected as the most suitable
    approach for prototypical implementation.
    The digital twin prototype is realised using an automation controller, a simulation
    adapter, a virtual fieldbus device, and the tools Siemens Simit (SIMIT) and NX Mecha
    tronics Concept Designer (NX-MCD). The three defined test cases are implemented
    in accordance with the test concept for automated execution using the xUnit testing
    framework and executed on the digital twin prototype. Finally, the test results of the
    prototype are analysed and evaluated based on the results achieved on the CNC machine
    tool.
    The findings demonstrate that subsequent integration of the digital twin prototype
    into the machine control architecture is technically feasible, although with limitations,
    and that it can be used for the automated testing of selected software components of
    the machine control system. Limitations arise from the reduced level of modelling, the
    asynchronous cycle control, and the increased latency in the exchange of process data
    with the virtual fieldbus device. As a result, the behaviour differs from that of the CNC
    machine tool. However, the digital twin prototype proves to be a viable pre-testing
    platform and represents a suitable approach for enhancing the test process in terms of
    quality and degree of automation. Nonetheless, the digital twin prototype cannot replace
    the final tests on the CNC machine tool.
    Date of Award2026
    Original languageGerman (Austria)
    Awarding Institution
    • FH OÖ
    SupervisorGabriel Kronberger (Supervisor)

    Studyprogram

    • Information Engineering and -Management

    Cite this

    '