Model Based Design of Inductive Components - Thermal Simulation and Parameter Determination

Simon Merschak; Mario Jungwirth; Daniel Hofinger; Günter Ritzberger

doi:10.1007/978-3-030-45093-9_6

Model Based Design of Inductive Components - Thermal Simulation and Parameter Determination

Simon Merschak, Mario Jungwirth, Daniel Hofinger, Günter Ritzberger

Research Center Wels

Research output: Chapter in Book/Report/Conference proceedings › Conference contribution › peer-review

Abstract

To ensure a faultless operation of an inductive component and to optimize the efficiency, the thermal behavior of the component has to be considered in an early design phase. In a previous project, a computer aided design tool for inductors was developed. In this tool thermal network models are used to calculate the thermal behavior. Therefore thermal resistance values of all winding materials are required and have to be measured. A measurement setup for the measurement of thermal resistances was developed, built and tested. In this paper the used measurement principle and the consideration of systematic measurement errors are described. A finite element method (FEM) simulation of the measurement setup is used to verify the calculation of the thermal resistance values.

Original language	English
Title of host publication	Computer Aided Systems Theory – EUROCAST 2019 - 17th International Conference, Revised Selected Papers
Editors	Roberto Moreno-Díaz, Alexis Quesada-Arencibia, Franz Pichler
Publisher	Springer
Pages	44-51
Number of pages	8
ISBN (Print)	9783030450922
DOIs	https://doi.org/10.1007/978-3-030-45093-9_6
Publication status	Published - 2020
Event	17th International Conference on Computer Aided Systems Theory, EUROCAST 2019 - Las Palmas de Gran Canaria, Spain Duration: 17 Feb 2019 → 22 Feb 2019

Publication series

Name	Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)
Volume	12013 LNCS
ISSN (Print)	0302-9743
ISSN (Electronic)	1611-3349

Conference

Conference	17th International Conference on Computer Aided Systems Theory, EUROCAST 2019
Country/Territory	Spain
City	Las Palmas de Gran Canaria
Period	17.02.2019 → 22.02.2019

Keywords

Thermal losses
Thermal network model
Thermal resistance measurement

Access to Document

10.1007/978-3-030-45093-9_6

Cite this

Merschak, S., Jungwirth, M., Hofinger, D., & Ritzberger, G. (2020). Model Based Design of Inductive Components - Thermal Simulation and Parameter Determination. In R. Moreno-Díaz, A. Quesada-Arencibia, & F. Pichler (Eds.), Computer Aided Systems Theory – EUROCAST 2019 - 17th International Conference, Revised Selected Papers (pp. 44-51). (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); Vol. 12013 LNCS). Springer. https://doi.org/10.1007/978-3-030-45093-9_6

Merschak, Simon ; Jungwirth, Mario ; Hofinger, Daniel et al. / Model Based Design of Inductive Components - Thermal Simulation and Parameter Determination. Computer Aided Systems Theory – EUROCAST 2019 - 17th International Conference, Revised Selected Papers. editor / Roberto Moreno-Díaz ; Alexis Quesada-Arencibia ; Franz Pichler. Springer, 2020. pp. 44-51 (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)).

@inproceedings{ba4c73a5e333481a869053d61f46c7bf,

title = "Model Based Design of Inductive Components - Thermal Simulation and Parameter Determination",

abstract = "To ensure a faultless operation of an inductive component and to optimize the efficiency, the thermal behavior of the component has to be considered in an early design phase. In a previous project, a computer aided design tool for inductors was developed. In this tool thermal network models are used to calculate the thermal behavior. Therefore thermal resistance values of all winding materials are required and have to be measured. A measurement setup for the measurement of thermal resistances was developed, built and tested. In this paper the used measurement principle and the consideration of systematic measurement errors are described. A finite element method (FEM) simulation of the measurement setup is used to verify the calculation of the thermal resistance values.",

keywords = "Thermal losses, Thermal network model, Thermal resistance measurement",

author = "Simon Merschak and Mario Jungwirth and Daniel Hofinger and G{\"u}nter Ritzberger",

note = "Publisher Copyright: {\textcopyright} 2020, Springer Nature Switzerland AG.; 17th International Conference on Computer Aided Systems Theory, EUROCAST 2019 ; Conference date: 17-02-2019 Through 22-02-2019",

year = "2020",

doi = "10.1007/978-3-030-45093-9_6",

language = "English",

isbn = "9783030450922",

series = "Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)",

publisher = "Springer",

pages = "44--51",

editor = "Roberto Moreno-D{\'i}az and Alexis Quesada-Arencibia and Franz Pichler",

booktitle = "Computer Aided Systems Theory – EUROCAST 2019 - 17th International Conference, Revised Selected Papers",

address = "Germany",

}

Merschak, S , Jungwirth, M, Hofinger, D & Ritzberger, G 2020, Model Based Design of Inductive Components - Thermal Simulation and Parameter Determination. in R Moreno-Díaz, A Quesada-Arencibia & F Pichler (eds), Computer Aided Systems Theory – EUROCAST 2019 - 17th International Conference, Revised Selected Papers. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), vol. 12013 LNCS, Springer, pp. 44-51, 17th International Conference on Computer Aided Systems Theory, EUROCAST 2019, Las Palmas de Gran Canaria, Spain, 17.02.2019. https://doi.org/10.1007/978-3-030-45093-9_6

Model Based Design of Inductive Components - Thermal Simulation and Parameter Determination. / Merschak, Simon ; Jungwirth, Mario; Hofinger, Daniel et al.
Computer Aided Systems Theory – EUROCAST 2019 - 17th International Conference, Revised Selected Papers. ed. / Roberto Moreno-Díaz; Alexis Quesada-Arencibia; Franz Pichler. Springer, 2020. p. 44-51 (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); Vol. 12013 LNCS).

Research output: Chapter in Book/Report/Conference proceedings › Conference contribution › peer-review

TY - GEN

T1 - Model Based Design of Inductive Components - Thermal Simulation and Parameter Determination

AU - Merschak, Simon

AU - Jungwirth, Mario

AU - Hofinger, Daniel

AU - Ritzberger, Günter

PY - 2020

Y1 - 2020

N2 - To ensure a faultless operation of an inductive component and to optimize the efficiency, the thermal behavior of the component has to be considered in an early design phase. In a previous project, a computer aided design tool for inductors was developed. In this tool thermal network models are used to calculate the thermal behavior. Therefore thermal resistance values of all winding materials are required and have to be measured. A measurement setup for the measurement of thermal resistances was developed, built and tested. In this paper the used measurement principle and the consideration of systematic measurement errors are described. A finite element method (FEM) simulation of the measurement setup is used to verify the calculation of the thermal resistance values.

AB - To ensure a faultless operation of an inductive component and to optimize the efficiency, the thermal behavior of the component has to be considered in an early design phase. In a previous project, a computer aided design tool for inductors was developed. In this tool thermal network models are used to calculate the thermal behavior. Therefore thermal resistance values of all winding materials are required and have to be measured. A measurement setup for the measurement of thermal resistances was developed, built and tested. In this paper the used measurement principle and the consideration of systematic measurement errors are described. A finite element method (FEM) simulation of the measurement setup is used to verify the calculation of the thermal resistance values.

KW - Thermal losses

KW - Thermal network model

KW - Thermal resistance measurement

UR - http://www.scopus.com/inward/record.url?scp=85083991937&partnerID=8YFLogxK

U2 - 10.1007/978-3-030-45093-9_6

DO - 10.1007/978-3-030-45093-9_6

M3 - Conference contribution

SN - 9783030450922

T3 - Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)

SP - 44

EP - 51

BT - Computer Aided Systems Theory – EUROCAST 2019 - 17th International Conference, Revised Selected Papers

A2 - Moreno-Díaz, Roberto

A2 - Quesada-Arencibia, Alexis

A2 - Pichler, Franz

PB - Springer

T2 - 17th International Conference on Computer Aided Systems Theory, EUROCAST 2019

Y2 - 17 February 2019 through 22 February 2019

ER -

Merschak S , Jungwirth M, Hofinger D, Ritzberger G. Model Based Design of Inductive Components - Thermal Simulation and Parameter Determination. In Moreno-Díaz R, Quesada-Arencibia A, Pichler F, editors, Computer Aided Systems Theory – EUROCAST 2019 - 17th International Conference, Revised Selected Papers. Springer. 2020. p. 44-51. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)). doi: 10.1007/978-3-030-45093-9_6

Model Based Design of Inductive Components - Thermal Simulation and Parameter Determination

Abstract

Publication series

Conference

Keywords

Access to Document

Other files and links

Fingerprint

Cite this