Damage Characterization of Discontinuous Fibre Reinforced Polymers by X-ray Computed Tomography

Keyphrases

• X-ray Computed Tomography (X-CT) 100%
• Long Glass Fiber 100%
• Fiber Orientation 100%
• Failure Behavior 100%
• Damage Characterization 100%
• Glass Fiber Reinforced Polypropylene 100%
• Defect Formation 100%
• Fiber Characterization 100%
• Discontinuous Fiber Reinforced Polymers 100%
• Glass Fiber Reinforced 66%
• Further Development 66%
• Microstructure 66%
• Short Glass Fiber 66%
• Formation Behavior 66%
• Local Strain 66%
• In-situ Test 66%
• Defect Characterization 66%
• Fiber-reinforced Materials 66%
• Strain Development 66%
• Three-dimensional (3D) 33%
• Fiber Content 33%
• Material Model 33%
• Industrial Application 33%
• Highest Good 33%
• Excellent Mechanical Properties 33%
• Fiber Length 33%
• Damage Behavior 33%
• Microstructural 33%
• High Strength 33%
• Material Development 33%
• Application Development 33%
• Safety Margin 33%
• Vol% 33%
• In Situ Investigation 33%
• Stress Relaxation 33%
• Image Quality 33%
• Long Fiber 33%
• High Stiffness 33%
• Failure Model 33%
• Short Fiber Reinforced 33%
• Mechanical Load 33%
• Micromechanical Simulation 33%
• In Situ Characterization 33%
• Lightweight Design 33%
• Plane Strain 33%
• Plane Stress State 33%
• Characterization Approaches 33%
• Fiber Defects 33%
• Impact Behavior 33%
• In Situ Experiment 33%
• Scan Area 33%
• Anisotropic Material Behavior 33%
• Double-edged 33%
• Stress-strain State 33%
• Constant Radius 33%
• Relaxation Process 33%
• Strain Analysis 33%
• Quantitative Level 33%

Engineering

• Fiber Orientation 100%
• Failure Behavior 100%
• Reinforced Plastic 100%
• Local Strain 66%
• Fibre-Reinforced Material 66%
• In-Situ Testing 66%
• Fiber Content 33%
• Fibre Length 33%
• Anisotropic 33%
• Industrial Applications 33%
• Material Model 33%
• Tensiles 33%
• Damage Behavior 33%
• Material Behavior 33%
• Test Specimen 33%
• Stress Relaxation 33%
• Situ Investigation 33%
• Long Fiber 33%
• Short Fiber 33%
• Failure Model 33%
• Strain Analysis 33%
• Investigated Material 33%
• Safety Margin 33%
• Lightweight Design 33%
• Plane Stress State 33%
• Mechanical Load 33%
• Impact Behavior 33%
• Relaxation Process 33%
• Plane Strain 33%
• Constant Radius 33%

Material Science

• Reinforced Plastic 100%
• Fiber Reinforced Material 100%
• Glass Fiber 100%
• X-Ray Computed Tomography 100%
• Polypropylene 60%
• Thermoplastics 20%
• Anisotropic Material 20%
• Stress Relaxation 20%