Computed Tomography

2023

Analysis of Extracellular Vesicle Data on Fluorescence and Atomic Force Microscopy Images

Janout, H., Schurr, J., Haghofer, A., Hauser, F., Jacak, J. & Winkler, S., 2023, Biomedical Engineering Systems and Technologies - 15th International Joint Conference, BIOSTEC 2022, Revised Selected Papers. Roque, A. C. A., Gracanin, D., Lorenz, R., Tsanas, A., Bier, N., Fred, A. & Gamboa, H. (eds.). Springer, p. 16-33 18 p. (Communications in Computer and Information Science; vol. 1814 CCIS).

Research output: Chapter in Book/Report/Conference proceedings › Conference contribution › peer-review

Automated Data Adaptation for the Segmentation of Blood Vessels

Haghofer, A., Ebner, T., Kainz, P., Weißensteiner, M., Ghaffari-Tabrizi-Wizsy, N., Hatab, I., Scharinger, J. & Winkler, S., 2023, Biomedical Engineering Systems and Technologies - 15th International Joint Conference, BIOSTEC 2022, Revised Selected Papers. Roque, A. C. A., Gracanin, D., Lorenz, R., Tsanas, A., Bier, N., Fred, A. & Gamboa, H. (eds.). Springer, p. 53-72 20 p. (Communications in Computer and Information Science; vol. 1814 CCIS).

Research output: Chapter in Book/Report/Conference proceedings › Conference contribution › peer-review

LOCAL DEFECT FORMATION IN SHORT GLASS FIBRE REINFORCED POLYMERS - MICRO-MECHANICAL SIMULATIONS AND INTERRUPTED IN-SITU EXPERIMENTS

Maurer, J., Krölling, D., Salaberger, D., Jerabek, M., Kastner, J. & Major, Z., 11 Oct 2023, 18th Youth Symposium on Experimental Solid Mechanics, YSESM 2023. Kytyr, D., Doktor, T. & Zlamal, P. (eds.). Czech Technical University in Prague, p. 61-66 6 p. (Acta Polytechnica CTU Proceedings; vol. 42).

Research output: Chapter in Book/Report/Conference proceedings › Conference contribution › peer-review

Open Access

Uncertainty Unveiled: Revealing the Uncertainty of Distribution Visualization Through Cross Reality

Gall, A., Heim, A., Fröhler, B. & Heinzl, C., 16 Oct 2023, Proceedings - 2023 IEEE International Symposium on Mixed and Augmented Reality Adjunct, ISMAR-Adjunct 2023. Bruder, G., Olivier, A.-H., Cunningham, A., Peng, E. Y., Grubert, J. & Williams, I. (eds.). Institute of Electrical and Electronics Engineers Inc., p. 20-24 5 p. (Proceedings - 2023 IEEE International Symposium on Mixed and Augmented Reality Adjunct, ISMAR-Adjunct 2023).

Research output: Chapter in Book/Report/Conference proceedings › Conference contribution › peer-review

2022

BUILD QUALITY ANALYSIS OF ADDITIVELY MANUFACTURED LOCALLY ENDLESS FIBER REINFORCED POLYAMIDE

Frank, M., Mrozek, D., Glinz, J., Senck, S. & Hinterhoelzl, R., 2022, Manufacturing. Vassilopoulos, A. P. & Michaud, V. (eds.). Composite Construction Laboratory (CCLab), Ecole Polytechnique Federale de Lausanne (EPFL), p. 334-341 8 p. (ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability; vol. 2).

Research output: Chapter in Book/Report/Conference proceedings › Conference contribution › peer-review

COMPARING LOCAL FIBER ANGLES FROM DRAPING EXPERIMENTS TO SIMULATIONS

Keller, S., Maier, F., Osterberger, J. & Hinterhölzl, R. M., 2022, Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability . Vassilopoulos, A. P. & Michaud, V. (eds.). Lausanne: EPFL Lausanne, Composite Construction Laboratory, Vol. Vol 1-6. p. 710-717 8 p. (ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability; vol. 3).

Research output: Chapter in Book/Report/Conference proceedings › Conference contribution › peer-review

Open Access

Comparison of defect detectability between Computed Tomography inspection and CT simulation using a calibrated defect phantom

Galleguillos, C., Senck, S., Vilches, C., Heupl, S. & Lasagni, F., 8 Mar 2022, Proceedings of 11th Conference on Industrial Computed Tomography (iCT) 2022. p. 1-6 6 p.

Research output: Chapter in Book/Report/Conference proceedings › Conference contribution

Comparison of preparation methods for the structural examination of meat using micro-computed tomography

Pointner, T., Auer, J., Senck, S., Kastner, J. & Mathmann, K., 2022, Proceedings of 11th Conference on Industrial Computed Tomography (iCT) 2022. p. 1-7

Research output: Chapter in Book/Report/Conference proceedings › Conference contribution

Damage Detection and Identification in Composites by Acoustic Emission, Ultrasonic Inspection and Computer Tomography

Scheerer, M., Simon, Z., Marischler, M. & Senck, S., 22 Jun 2022, European Workshop on Structural Health Monitoring, EWSHM 2022, Volume 3: EWSHM 2022. Rizzo, P. & Milazzo, A. (eds.). p. 883-891 9 p. (Lecture Notes in Civil Engineering; vol. 270 LNCE).

Research output: Chapter in Book/Report/Conference proceedings › Conference contribution

DESIGN FOR INNOVATIVE AND COST-EFFICIENT MANUFACTURING OF COMPOSITE SANDWICH STRUCTURES WITH FOAM MOLDED CORES FOR HIGH-RATE PRODUCTION OF WING MOVEABLES

Hinterhölzl, R. M., Shehata, K., Sendner, F. M., Wolfahrt, M., Schneiderbauer, G., Glinz, J., Semlitsch, K. H. & Thor, M., 2022, Applications and Structures. Vassilopoulos, A. P. & Michaud, V. (eds.). Composite Construction Laboratory (CCLab), Ecole Polytechnique Federale de Lausanne (EPFL), p. 394-400 7 p. (ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability; vol. 5).

Research output: Chapter in Book/Report/Conference proceedings › Conference contribution › peer-review

Identification of Surrogate Models for the Prediction of Degrees of Freedom within a Tolerance Chain

Janout, H., Paier, T., Ringelhahn, C., Heckmann, M. K., Haghofer, A., Kronberger, G. & Winkler, S., 2022, International Conference on Industry 4.0 and Smart Manufacturing.

Research output: Chapter in Book/Report/Conference proceedings › Conference contribution › peer-review

In-situ characterization of additively manufactured continuous fiber reinforced tensile test specimens by X-ray computed tomography

Glinz, J., Maurer, J., Eckl, M., Kastner, J. & Senck, S., 2022, AIAA SciTech Forum 2022. American Institute of Aeronautics and Astronautics Inc. (AIAA), AIAA 2022-1426. (AIAA Science and Technology Forum and Exposition, AIAA SciTech Forum 2022).

Research output: Chapter in Book/Report/Conference proceedings › Conference contribution › peer-review

4 Citations (Scopus)

Local stress-strain behaviour in short glass fibre reinforced polymers - a comparison of different simulation approaches with experimental results based on X-ray computed tomography data

Maurer, J., Krölling, D. C., Jerabek, M., Salaberger, D., Kastner, J. & Major, Z., 2022, Materials. Vassilopoulos, A. P. & Michaud, V. (eds.). Composite Construction Laboratory (CCLab), Ecole Polytechnique Federale de Lausanne (EPFL), p. 1159-1166 8 p. (ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability; vol. 1).

Research output: Chapter in Book/Report/Conference proceedings › Conference contribution › peer-review

2 Citations (Scopus)

Non-destructive evaluation of patient-specific cranial implants using microcomputed tomography

Wittner, C., Kastner, J., Schäfer, U., Tödtling, M., Trieb, K. & Senck, S., 8 Feb 2022, 11th Conference on Industrial Computed Tomography. p. 1 - 8 8 p.

Research output: Chapter in Book/Report/Conference proceedings › Conference contribution

Quantitative evaluation of void content in polymer matrix composites by means of X-ray computed tomography

Plank, B., Höglinger, M., Savanadaiah, C., Stadler, H., Berer, M., Stelzer, P., Längauer, M., Heupl, S., Maurer, J. & Kastner, J., 20 Jul 2022, Book of Abstracts - Verbund 2022: 23. Symposium Verbundwerkstoffe und Werkstoffverbunde. DGM - Deutsche Gesellschaft für Materialkunde e.V., p. 176 178 p.

Research output: Chapter in Book/Report/Conference proceedings › Conference contribution

SIMULATING PID FOR CURING IN A DIAPHRAGM FORMING STATION

Maier, F., Osterberger, J., Silber, F. & Hinterhölzl, R. M., 2022, Characterization: Composites Meet Sustainability . Vassilopoulos, A. P. & Michaud, V. (eds.). Lausanne: EPFL Lausanne, Composite Construction Laboratory, Vol. Vol 1-6. p. 409-416 8 p. (ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability; vol. 3).

Research output: Chapter in Book/Report/Conference proceedings › Conference contribution › peer-review

Open Access

Simulation-based optimization of microcomputed tomography inspection parameters for topology-optimized aerospace brackets

Senck, S., Rendl, S., Kastner, J., Ehrenfellner, P., Happl, M. & Reiter, M., 2022, AIAA SciTech Forum 2022. American Institute of Aeronautics and Astronautics Inc. (AIAA), p. 1-7 7 p. AIAA 2022-0798. (AIAA Science and Technology Forum and Exposition, AIAA SciTech Forum 2022).

Research output: Chapter in Book/Report/Conference proceedings › Conference contribution

2 Citations (Scopus)

TALINT grating kits for X-ray interferometry in the industrial laboratory

Nafre, A., Glinz, J., Schulz, J. & Senck, S., 8 Feb 2022, 11th Conference on Industrial Computed Tomography. p. 1-9 9 p.

Research output: Chapter in Book/Report/Conference proceedings › Conference contribution

The long journey to the training of a deep neural network for segmenting pores and fibers

Yosifov, M., Weinberger, P., Fröhler, B., Kastner, J. & Heinzl, C., 2022, (Accepted/In press) Proceedings of the Industrial Computed Tomography Conference (iCT) 2022.

Research output: Chapter in Book/Report/Conference proceedings › Conference contribution › peer-review

VALIDATING SIMULATED RESIDUAL STRAINS DUE TO THERMOFORMING USING FBGS

Michael, P., Pollak, M., Zanghellini, C., Jungbauer, J., Maier, F. & Hinterhölzl, R., 2022, Life Cycle Assessment. Vassilopoulos, A. P. & Michaud, V. (eds.). Composite Construction Laboratory (CCLab), Ecole Polytechnique Federale de Lausanne (EPFL), p. 155-161 7 p. (ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability; vol. 6).

Research output: Chapter in Book/Report/Conference proceedings › Conference contribution › peer-review

Visual Coherence for Cross-Virtuality Analytics

Pointecker, F., Dalpiaz, M., Kainberger, P., Gall, A., Frohler, B., Heinzl, C. & Anthes, C., 2022, Proceedings - 2022 IEEE International Symposium on Mixed and Augmented Reality Adjunct, ISMAR-Adjunct 2022. Institute of Electrical and Electronics Engineers Inc., p. 161-166 6 p. (Proceedings - 2022 IEEE International Symposium on Mixed and Augmented Reality Adjunct, ISMAR-Adjunct 2022).

Research output: Chapter in Book/Report/Conference proceedings › Conference contribution › peer-review

1 Citation (Scopus)

Visualization Techniques for the Comparative Analysis of Multivariate Data of Fiber Reinforced Polymers

Heim, A., Maurer, J., Kastner, J. & Heinzl, C., 11 Feb 2022, 11th Conference on Industrial Computed Tomography (iCT) 2022, 8-11 Feb, Wels, Austria (iCT 2022).

Research output: Chapter in Book/Report/Conference proceedings › Conference contribution › peer-review

Open Access

Wire-Based Additive Manufacturing of Magnesium Alloys

Gneiger, S., Koutny, D., Senck, S., Schnall, M., Papenberg, N. & Klein, T., 1 Jan 2022, Magnesium Technology 2022. Maier, P., Barela, S., Miller, V. M. & Neelameggham, N. R. (eds.). p. 175–179 5 p. (Minerals, Metals and Materials Series).

Research output: Chapter in Book/Report/Conference proceedings › Conference contribution

1 Citation (Scopus)

2021

CoSi: Visual Comparison of Similarities in High-Dimensional Data Ensembles

Heim, A., Gröller, E. & Heinzl, C., 2021, Vision, Modeling, and Visualization. Andres, B., Campen, M. & Sedlmair, M. (eds.). The Eurographics Association, p. 117-124 8 p.

Research output: Chapter in Book/Report/Conference proceedings › Conference contribution › peer-review

Open Access

Cross Virtuality Analytics in Materials Sciences

Gall, A., Fröhler, B. & Heinzl, C., Nov 2021, ISS'21 Workshop Proceedings: "Transitional Interfaces in Mixed and Cross-Reality: A new frontier?".

Research output: Chapter in Book/Report/Conference proceedings › Conference contribution › peer-review

Open Access

ImNDT: Immersive Workspace for the Analysis of Multidimensional Material Data From Non-Destructive Testing

Gall, A., Gröller, E. & Heinzl, C., 8 Dec 2021, Proceedings - VRST 2021: 27th ACM Symposium on Virtual Reality Software and Technology. Spencer, S. N. (ed.). New York, NY, USA: Association for Computing Machinery, 11 p. 9. (Proceedings of the ACM Symposium on Virtual Reality Software and Technology, VRST).

Research output: Chapter in Book/Report/Conference proceedings › Conference contribution › peer-review

5 Citations (Scopus)

Inspection of fiber waviness in carbon fiber laminates by talbot-lau x-ray grating interferometry

Glinz, J., Thor, M., Ayalur Karunakaran, S., Kastner, J. & Senck, S., Jan 2021, AIAA SciTech 2021 Forum. American Institute of Aeronautics and Astronautics Inc. (AIAA), p. 1-8 8 p. (AIAA Scitech 2021 Forum).

Research output: Chapter in Book/Report/Conference proceedings › Conference contribution

3 Citations (Scopus)

Photoacoustic reconstruction from photothermal measurements

Burgholzer, P., Thummerer, G., Mayr, G. & Haltmeier, M., 2021, Photons Plus Ultrasound: Imaging and Sensing 2021. Oraevsky, A. A. & Wang, L. V. (eds.). SPIE, 116421S. (Progress in Biomedical Optics and Imaging - Proceedings of SPIE; vol. 11642).

Research output: Chapter in Book/Report/Conference proceedings › Conference contribution › peer-review

Quantification of surface-near porosity in additively manufactured aluminum brackets using x-ray microcomputed tomography

Senck, S., Glinz, J., Happl, M., Scheerer, M., Reiter, T. & Kastner, J., 2021, AIAA Scitech 2021 Forum. American Institute of Aeronautics and Astronautics Inc. (AIAA), p. 1-7 7 p. (AIAA Scitech 2021 Forum).

Research output: Chapter in Book/Report/Conference proceedings › Conference contribution › peer-review

6 Citations (Scopus)

2020

Enhancement of binding matrix stiffness in composite filament Co-extrusion additive manufacturing

Savandaiah, C., Maurer, J., Lesslhumer, J., Haider, A. & Steinbichler, G., 2020, SPE ANTEC 2020: The Annual Technical Conference for Plastic Professionals. Society of Plastics Engineers (SPE), p. 13-18 6 p. (Annual Technical Conference - ANTEC, Conference Proceedings; vol. 1).

Research output: Chapter in Book/Report/Conference proceedings › Conference contribution › peer-review

2 Citations (Scopus)

2019

An Interactive Visual Comparison Tool for 3D Volume Datasets represented by Nonlinearly Scaled 1D Line Plots through Space-filling Curves

Weissenböck, J., Fröhler, B., Gröller, E., Sanctorum, J., De Beenhouwer, J., Sijbers, J., Ayalur Karunakaran, S., Höller, H., Kastner, J. & Heinzl, C., 2019, 9th International Conference on Industrial Computed Tomography (iCT) 2019. 9 p.

Research output: Chapter in Book/Report/Conference proceedings › Conference contribution

Damage characterisation of short glass fibre reinforced polyamide with different fibre content by an interrupted in-situ X-Ray computed tomography test

Maurer, J., Hannesschläger, C., Plank, B. & Kastner, J., 2019, Digital Industrial Radiology and Computed Tomography.

Research output: Chapter in Book/Report/Conference proceedings › Conference contribution

Multimodal Transfer Functions for Talbot-Lau Grating Interferometry Data

da Cunha Melo, L., Fröhler, B., Weissenböck, J., Kastner, J. & Heinzl, C., 2019, Proceedings of Symposium on Digital Industrial Radiology and Computed Tomography (DIR2019), Fürth. 9 p.

Research output: Chapter in Book/Report/Conference proceedings › Conference contribution

2018

3D computed tomography as Quality Control Tool in Advanced Composite Manufacturing

Ecker, J. V., Fürst, C., Unterweger, C., Plank, B. & Haider, A., 2018, Proceedings of the 8th Conference on Industrial Computed Tomography, Wels, Austria (iCT 2018). 7 p.

Research output: Chapter in Book/Report/Conference proceedings › Conference contribution

Challenges for grating interferometer X-ray computed tomography for practical applications in industry

Kastner, J., Gusenbauer, C., Plank, B., Glinz, J. & Senck, S., 2018, Proceedings of the 12th European Conference on Non-destructive Testing.

Research output: Chapter in Book/Report/Conference proceedings › Conference contribution

Exploring Uncertainty in Image Segmentation Ensembles

Translated title of the contribution: Exploring Uncertainty in Image Segmentation EnsemblesFröhler, B., Möller, T., Weissenböck, J., Hege, H.-C., Kastner, J. & Heinzl, C., 2018, Proceedings of the 20th EG/VGTC Conference on Visualization. p. 33-35 3 p.

Research output: Chapter in Book/Report/Conference proceedings › Conference contribution

open_iA: A Framework for Analyzing Industrial Computed Tomography Data

Fröhler, B., Heinzl, C., Weissenböck, J., Amirkhanov, A., Arikan, M. & Kastner, J., 2018, Proceedings of the 12th European Conference on Non-destructive Testing.

Research output: Chapter in Book/Report/Conference proceedings › Conference contribution

X-ray computed tomography for applications in industry and materials science

Kastner, J., Heinzl, C. & Glinz, J., 2018, Proceedings of the 57th Annual British Conference on Non-Destructive Testing. p. 1-12

Research output: Chapter in Book/Report/Conference proceedings › Conference contribution

2017

4D Röntgen-Computertomografie mittels konventioneller Labor CTs: Möglichkeiten und Einschränkungen

Translated title of the contribution: 4D X-ray computed tomography by using conventional laboratory CTs: possibilities and limitationsPlank, B., Salaberger, D., Rao, G., Amirkhanov, A. & Kastner, J., 2017, DGZfP-Jahrestagung 2017. 9 p.

Research output: Chapter in Book/Report/Conference proceedings › Conference contribution

ALTERNATIVE METHODS FOR DETERMINING MICROCLEANLINESS: A STUDY BASED ON HOT WORK TOOL STEELS

Translated title of the contribution: ALTERNATIVE METHODS FOR DETERMINING MICROCLEANLINESS: A STUDY BASED ON HOT WORK TOOL STEELSSchützenhöfer, W., Decker, C., Plank, B. & Plesiutschnig, E., 2017, IFM 2017 – 20th International Forgemasters Meeting 2017. 10 p.

Research output: Chapter in Book/Report/Conference proceedings › Conference contribution

Beurteilung von belastungsbedingten Schädigungszuständen in CFK mit Spannungskonzentrationen mithilfe der Puls-Thermographie

Translated title of the contribution: Beurteilung von belastungsbedingten Schädigungszuständen in CFK mit Spannungskonzentrationen mithilfe der Puls-ThermographieMayr, G., Gruber, J., Schedlberger, T., Gusenbauer, C. & Hendorfer, G., 2017, Berichtsband BB 163 Thermographie-Kolloquium 2017. 9 p.

Research output: Chapter in Book/Report/Conference proceedings › Conference contribution

Comparison of Final Fracture Extraction Techniques for Interrupted In situ Tensile Tests of Glass Fiber Reinforced Polymers

Amirkhanov, A., Salaberger, D., Kastner, J., Heinzl, C. & Gröller, E., 2017, Proceedings of the 7th Conference on Industrial Computed Tomography, Leuven, Belgium (iCT 2017). p. 1-7

Research output: Chapter in Book/Report/Conference proceedings › Conference contribution

High resolution X-ray computed tomography for non-destructive characterization and in-situ investigations

Kastner, J., Salaberger, D., Heinzl, C., Rao, G. & Gusenbauer, C., 2017, APCNDT. 7 p.

Research output: Chapter in Book/Report/Conference proceedings › Conference contribution

Parameter-Space Exploration for Computed Tomography Image Analysis Algorithms

Fröhler, B., Heinzl, C., Kastner, J. & Möller, T., 2017, Proceedings of the 7th Conference on Industrial Computed Tomography, Leuven, Belgium (iCT 2017). p. 1-6

Research output: Chapter in Book/Report/Conference proceedings › Conference contribution

PorosityAnalyzer: Visual analysis and evaluation of segmentation pipelines to determine the porosity in fiber-reinforced polymers

Weissenböck, J., Amirkhanov, A., Gröller, E., Kastner, J. & Heinzl, C., 20 Mar 2017, 2016 IEEE Conference on Visual Analytics Science and Technology, VAST 2016 - Proceedings. Andrienko, G., Liu, S., Andrienko, G. & Stasko, J. (eds.). Institute of Electrical and Electronics Engineers Inc., p. 101-110 10 p. 7883516. (2016 IEEE Conference on Visual Analytics Science and Technology, VAST 2016 - Proceedings).

Research output: Chapter in Book/Report/Conference proceedings › Conference contribution › peer-review

12 Citations (Scopus)

Talbot-Lau grating interferometer μXCT for quantitative characterization of polymeric structures by using phase and dark field contrast

Kastner, J., Gusenbauer, C., Senck, S. & Rao, G., 2017, APCNDT.

Research output: Chapter in Book/Report/Conference proceedings › Conference contribution

2016

Computed Tomography

Research output

Search results