Research output per year
Research output per year
- 1 - 50 out of 292 results
Search results
-
2024
A comparison of X-ray attenuation, differential phase, and dark-field contrast imaging for the detection of porosity in carbon fiber reinforced cyanate ester
Glinz, J., Plank, B., Gutekunst, J., Scheerer, M., Zabler, S., Kastner, J. & Senck, S., 15 Jul 2024, In: NDT and E International. 2024, 147, 9 p., 103194.Research output: Contribution to journal › Article › peer-review
Open Access1 Citation (Scopus) -
Assessment of the effects of the addition of continuous fiber filaments in PA 6/short fiber 3D-printed components using interrupted in-situ x-ray CT tensile testing
Stamopoulos, A. G., Glinz, J. & Senck, S., May 2024, In: Engineering Failure Analysis. 159, p. 1-15 15 p., 108121.Research output: Contribution to journal › Article › peer-review
6 Citations (Scopus) -
AUTOMATIC DETECTION OF GEOMETRIC DEFECTS IN MACROSCOPIC FE DRAPING SIMULATION RESULTS
Keller, S., Maier, F., Trauth, A., Sause, M. & Hinterhölzl, R. M., Jul 2024, p. 183-189. 7 p.Research output: Contribution to conference › Paper › peer-review
-
Ceramic additive manufacturing and microstructural analysis of tricalcium phosphate implants using X-ray microcomputed tomography
Senck, S., Glinz, J., Heupl, S., Kastner, J., Trieb, K., Scheithauer, U., Dahl, S. S. & Jensen, M. B., Sept 2024, In: Open Ceramics. 19, p. 1-9 9 p., 100628.Research output: Contribution to journal › Article › peer-review
Open Access1 Citation (Scopus) -
Characterization of PPS Piston and Packing Ring Materials for High-Pressure Hydrogen Applications
Pöllinger, A., Maurer, J., Koch, T., Krenn, S., Plank, B., Schwarz, S., Stöger-Pollach, M., Siakkou, E., Smrczkova, K. & Schöbel, M., Feb 2024, In: Polymers. 16, 3, 412.Research output: Contribution to journal › Article › peer-review
Open Access3 Citations (Scopus) -
Effects of Hygrothermal Aging on Microstructure and Tensile Strength in 3D Printed Carbon Composites
Glinz, J., Wolfahrt, M., Stamopoulos, A. G., Eckl, M., Frank, M., Kastner, J. & Senck, S., 4 Jan 2024, p. 1-7. 7 p.Research output: Contribution to conference › Paper
-
Fibre and failure characterization in long glass fibre reinforced polypropylene by X-ray computed tomography
Maurer, J., Salaberger, D., Jerabek, M., Fröhler, B., Kastner, J. & Major, Z., Jan 2024, In: Polymer Testing. 130, 108313.Research output: Contribution to journal › Article › peer-review
Open Access1 Citation (Scopus) -
Optimization of Hot Gas Welding of Hybrid Thermoplastic-Thermoset Composites Using Taguchi Method
Steiner, G., Kuttner, D., Lochner, H. & Thor, M., 19 Feb 2024, In: Applied Composite Materials. 31, 3, p. 775-797 23 p.Research output: Contribution to journal › Article › peer-review
Open Access1 Citation (Scopus) -
Photothermal defect imaging in hybrid fiber metal laminates using the virtual wave concept
Gahleitner, L., Thummerer, G., Plank, B., Wiedemann, J., Mayr, G., Hühne, C., Burgholzer, P. & Cakmak, U., 21 Feb 2024, In: Journal of Applied Physics. 135, 7, 13 p., 074903.Research output: Contribution to journal › Article › peer-review
1 Citation (Scopus) -
Quantitative phase and dark-field contrast computed tomography for industrial applications on lightweight materials
Glinz, J., 2024, 118 p.Research output: Types of Theses › Doctoral Thesis
Open Access -
Three-Dimensional Osseointegration Patterns of Cementless Femoral Stems: An ex Vivo Study with High-Resolution Imaging and Histological Evaluation
Schwarz, G. M., Synek, A., Senck, S., Kandathil, S. A., Holzleitner, M., Trieb, K., Huber, S., Pahr, D., Hofstaetter, J. G. & Hirtler, L., 5 Jun 2024, In: Journal of Bone and Joint Surgery. 106, 11, p. 941-949 9 p.Research output: Contribution to journal › Article › peer-review
-
Unsupervised Segmentation of Industrial X-ray Computed Tomography Data with the Segment Anything Model
Weinberger, P., Schwarz, L., Fröhler, B., Gall, A., Heim, A., Yosifov, M., Bodenhofer, U., Kastner, J. & Senck, S., 1 Jan 2024, (Submitted) In: Journal of Nondestructive Evaluation. 1 p.Research output: Contribution to journal › Article › peer-review
-
2023
3D-characterization of composite materials by Talbot-Lau grating interferometer radioscopy and computed tomography
Glinz, J., Kastner, J., Šleichrt, J., Schulz, J., Eckl, M., Kytýř, D., Ayalur-Karunakaran, S. & Senck, S., Jul 2023.Research output: Contribution to conference › Abstract
Open Access -
Additive manufacturing based bellows
Bonvoisin, B., Brandao, A., Hatzenbichler, M., Scheerer, M., Simon, Z., Senck, S. & Ghidini, T., Jan 2023, In: CEAS Space Journal. 15, 1, p. 27-35 9 p.Research output: Contribution to journal › Article › peer-review
-
Advancing research and education with simple setup Talbot-Lau-Interferometers
Gutekunst, J., Fettig, R., Schulz, J. & Glinz, J., Feb 2023, In: e-Journal of Nondestructive Testing . 28, 3, 6 p.Research output: Contribution to journal › Conference article
Open Access -
A machine learning based approach with an augmented dataset for fatigue life prediction of additively manufactured Ti-6Al-4V samples
Horňas, J., Běhal, J., Homola, P., Doubrava, R., Holzleitner, M. & Senck, S., 1 Dec 2023, In: Engineering Fracture Mechanics. 293, p. 1 19 p., 109709.Research output: Contribution to journal › Article › peer-review
Open Access8 Citations (Scopus) -
Analysis of Extracellular Vesicle Data on Fluorescence and Atomic Force Microscopy Images
Janout, H., Schurr, J., Haghofer, A., Hauser, F., Jacak, J. & Winkler, S., 2023, Biomedical Engineering Systems and Technologies - 15th International Joint Conference, BIOSTEC 2022, Revised Selected Papers. Roque, A. C. A., Gracanin, D., Lorenz, R., Tsanas, A., Bier, N., Fred, A. & Gamboa, H. (eds.). Springer, p. 16-33 18 p. (Communications in Computer and Information Science; vol. 1814 CCIS).Research output: Chapter in Book/Report/Conference proceedings › Conference contribution › peer-review
-
Analysis of the Manufacturing Porosity in Fused Filament Fabricated Onyx/Long Fiber Reinforced Composites Using X-Ray Computed Tomography
Pace, F., Stamopoulos, A. G., Eckl, M., Senck, S. & Glinz, J., Sept 2023, In: Journal of Nondestructive Evaluation. 18 p., 86.Research output: Contribution to journal › Article › peer-review
6 Citations (Scopus) -
Application of a modified 3D U-Net convolutional neural network architecture for the inspection of aerospace components
Yosifov, M., Weinberger, P., Fröhler, B., Plank, B., Kastner, J. & Heinzl, C., 2023, In: e-Journal of Nondestructive Testing . 28, 3, 6 p.Research output: Contribution to journal › Conference article
Open Access -
Assessment of Tribo-charging and Continuous Feeding Performance of Direct Compression Grades of Isomalt and Mannitol Powders
Beretta, M., Kruisz, J., Hörmann-Kincses, T. R., Magosi, V., Guo, M., Naderi, M., Heupl, S., Kastner, J., Spoerk, M. & Paudel, A., 28 Mar 2023, In: AAPS PharmSciTech. 24, 4, p. 91 91.Research output: Contribution to journal › Article › peer-review
Open Access2 Citations (Scopus) -
Automated Data Adaptation for the Segmentation of Blood Vessels
Haghofer, A., Ebner, T., Kainz, P., Weißensteiner, M., Ghaffari-Tabrizi-Wizsy, N., Hatab, I., Scharinger, J. & Winkler, S., 2023, Biomedical Engineering Systems and Technologies - 15th International Joint Conference, BIOSTEC 2022, Revised Selected Papers. Roque, A. C. A., Gracanin, D., Lorenz, R., Tsanas, A., Bier, N., Fred, A. & Gamboa, H. (eds.). Springer, p. 53-72 20 p. (Communications in Computer and Information Science; vol. 1814 CCIS).Research output: Chapter in Book/Report/Conference proceedings › Conference contribution › peer-review
1 Citation (Scopus) -
CREATING TRAINING DATA FOR SURROGATE MODELS USING FE DRAPING SIMULATION
Keller, S., Maier, F., Blies, P. M. & Hinterhölzl, R. M., 2023.Research output: Contribution to conference › Paper › peer-review
-
cuPARE: parametric reconstruction of curved fibres from glass fibre-reinforced composites
Elberfeld, T., Fröhler, B., Heinzl, C., Sijbers, J. & De Beenhouwer, J., 2023, In: Nondestructive Testing and Evaluation. 38, 4, p. 648-667 20 p.Research output: Contribution to journal › Article › peer-review
-
Defect detectability analysis via probability of defect detection between traditional and deep learning methods in numerical simulations
Yosifov, M., Weinberger, P., Reiter, M., Fröhler, B., De Beenhouwer, J., Sijbers, J., Kastner, J. & Heinzl, C., 2023, In: e-Journal of Nondestructive Testing . 28, 3, 10 p.Research output: Contribution to journal › Conference article
Open Access -
Evaluation of draping simulations by means of 3D laser scans and robot supported fiber angle scans
Osterberger, J., Maier, F., Keller, S. & Hinterhölzl, R. M., 2023, In: FRONTIERS IN MATERIALS. 10, 1133788.Research output: Contribution to journal › Article › peer-review
Open Access -
Fast Continuous In-Situ XCT of Additively Manufactured Carbon Fiber Reinforced Tensile Test Specimens
Glinz, J., Maurer, J., Holzleitner, M., Pace, F., Stamopoulos, A. G., Vopálenský, M., Kumpová, I., Eckl, M., Kastner, J. & Senck, S., 11 Oct 2023, In: Acta Polytechnica CTU Proceedings. p. 22-26 5 p.Research output: Contribution to journal › Article › peer-review
Open Access2 Citations (Scopus) -
Fatigue analysis and non-destructive evaluation of loaded aluminum brackets produced by selective laser melting
Senck, S., Reiter, T., Holzleitner, M., Glinz, J., Kastner, J., Happl, M. & Scheerer, M., 2023.Research output: Contribution to conference › Paper › peer-review
1 Citation (Scopus) -
High-Resolution 3D-Printing as a Promising Manufacturing Technology for Personalized Subcutaneous Implants
Eder, S., Brandl, B., Terzic, I., Palanisamy, A., Nguyen, T., Heupl, S., Senck, S., Katschnig, M., Roblegg, E. & Spörk, M., 22 Oct 2023.Research output: Contribution to conference › Abstract › peer-review
-
Histological classification of canine and feline lymphoma using a modular approach based on deep learning and advanced image processing
Haghofer, A., Fuchs-Baumgartinger, A., Lipnik, K., Klopfleisch, R., Aubreville, M., Scharinger, J., Weissenböck, H., Winkler, S. M. & Bertram, C. A., 9 Nov 2023, In: Scientific Reports. 13, 1, p. 1-15 15 p., 19436.Research output: Contribution to journal › Article › peer-review
Open Access4 Citations (Scopus) -
Influence of continuous fiber reinforcement on tensile properties in fused filament fabricated specimens
Glinz, J., Pace, F., Maurer, J., Holzleitner, M., Eckl, M., Vopálenský, M., Kumpová, I., Kastner, J., Stamopoulos, A. & Senck, S., 2023.Research output: Contribution to conference › Paper › peer-review
4 Citations (Scopus) -
Influence of post-consolidation on continuous carbon-fibre reinforced additively manufactured specimens in bending
Sieberer, S., Savandaiah, C., Pichler, S., Maurer, J. & Schagerl, M., 15 Sept 2023, In: Composite Structures. 320, 117176.Research output: Contribution to journal › Article › peer-review
2 Citations (Scopus) -
In Vitro Quantification of Cellular Spheroids in Patterned Petri Dishes
Schurr, J., Haghofer, A., Fürsatz, M., Janout, H., Nürnberg, S. & Winkler, S., 2023.Research output: Contribution to conference › Paper › peer-review
-
LOCAL DEFECT FORMATION IN SHORT GLASS FIBRE REINFORCED POLYMERS - MICRO-MECHANICAL SIMULATIONS AND INTERRUPTED IN-SITU EXPERIMENTS
Maurer, J., Krölling, D., Salaberger, D., Jerabek, M., Kastner, J. & Major, Z., 11 Oct 2023, 18th Youth Symposium on Experimental Solid Mechanics, YSESM 2023. Kytyr, D., Doktor, T. & Zlamal, P. (eds.). Czech Technical University in Prague, p. 61-66 6 p. (Acta Polytechnica CTU Proceedings; vol. 42).Research output: Chapter in Book/Report/Conference proceedings › Conference contribution › peer-review
Open Access -
Low-Fluorescence Starter for Optical 3D Lithography of Sub-40 nm Structures
Gvindzhiliia, G., Sivun, D., Naderer, C., Jacak, J. & Klar, T. A., 26 May 2023, In: ACS Applied Optical Materials. 1, 5, p. 945-951 7 p.Research output: Contribution to journal › Article › peer-review
Open Access3 Citations (Scopus) -
MIST – Mechanical In-situ Stage with Temperature control for X-ray computed tomography
Maurer, J., Heupl, S., Kendel, M., Holzleitner, M., Glinz, J., Senck, S., Auer, J. & Kastner, J., Mar 2023, In: e-Journal of Nondestructive Testing. 28, 3Research output: Contribution to journal › Conference article
Open Access -
MODELING OF THERMODYNAMIC BEHAVIOR OF THERMOPLASTIC COMPOSITES DURING PREHEATING IN AN INFRA-RED OVEN
Kobler, E., Birtha, J., Cäsar, B., Gahleitner, L., Mayr, G., Straka, K., Marschik, C., Steinbichler, G., Zwicklhuber, P. & Schlecht, S., 2023. 10 p.Research output: Contribution to conference › Paper › peer-review
-
Modelling fatigue life prediction of additively manufactured Ti-6Al-4V samples using machine learning approach
Horňas, J., Běhal, J., Homola, P., Senck, S., Holzleitner, M., Godja, N., Pásztor, Z., Hegedüs, B., Doubrava, R., Růžek, R. & Petrusová, L., Apr 2023, In: International Journal of Fatigue. 169, 107483.Research output: Contribution to journal › Article › peer-review
Open Access41 Citations (Scopus) -
NDTFlix: Collaborative remote analysis of X-ray computed tomography datasets
Fröhler, B., Weinberger, P., Gall, A., Heim, A., List, D., Schwajda, D. J., Anthes, C., Kumar, A., Kastner, J. & Heinzl, C., 2023, In: e-Journal of Nondestructive Testing . 28, 3, 7 p.Research output: Contribution to journal › Conference article
Open Access -
New buffer systems for photopainting of single biomolecules
Naderer, C., Krobath, H., Sivun, D., Gvindzhiliia, G., Klar, T. A. & Jacak, J., 2023, In: RSC Applied Interfaces. 1, 1, p. 110-121 12 p.Research output: Contribution to journal › Article › peer-review
Open Access -
Non-destructive evaluation of patient-specific, additively manufactured titanium foot implants using microcomputed tomography
Holzleitner, M., Happl, M., Hubmann, R., Godja, N., Kastner, J., Trieb, K. & Senck, S., Mar 2023, In: e-Journal of Nondestructive Testing. 28, 3Research output: Contribution to journal › Article
-
Novel biodegradable subcutaneous implants manufactured via high resolution 3D-printing
Brandl, B., Eder, S., Terzic, I., Nguyen, T., Heupl, S., Senck, S., Katschnig, M., Roblegg, E. & Spörk, M., 22 May 2023.Research output: Contribution to conference › Abstract › peer-review
-
Nuclear Morphometry using a Deep Learning-based Algorithm has Prognostic Relevance for Canine Cutaneous Mast Cell Tumors
Haghofer, A., Parlak, E., Bartel, A., Donovan, T. A., Assenmacher, C.-A., Bolfa, P., Dark, M. J., Fuchs-Baumgartinger, A., Klang, A., Jäger, K., Klopfleisch, R., Merz, S., Richter, B., Schulman, F. Y., Ganz, J., Scharinger, J., Aubreville, M., Winkler, S. M., Kiupel, M. & Bertram, C. A., 26 Sept 2023.Research output: Working paper › Preprint
File41 Downloads (Pure) -
Photothermal NDE of UD/Epoxy-Based Carbon Fibre Reinforced Laminates for Quantitative Porosity Analysis
Plasser, H., Mayr, G., Mayr, G., Zallinger, P., Plank, B., Hendorfer, G. & Major, Z., Jun 2023, In: Journal of Nondestructive Evaluation. 42, 2, 32.Research output: Contribution to journal › Article › peer-review
Open Access2 Citations (Scopus) -
Processing of AZ91D Magnesium Alloy by Laser Powder Bed Fusion
Nopová, K., Jaroš, J., Červinek, O., Pantělejev, L., Gneiger, S., Senck, S. & Koutný, D., Feb 2023, In: Applied Sciences (Switzerland). 13, 3, 1377.Research output: Contribution to journal › Article › peer-review
Open Access9 Citations (Scopus) -
Purification Analysis, Intracellular Tracking, and Colocalization of Extracellular Vesicles Using Atomic Force and 3D Single-Molecule Localization Microscopy
Puthukodan, S., Hofmann, M., Mairhofer, M., Janout, H., Schurr, J., Hauser, F., Naderer, C., Preiner, J., Winkler, S., Sivun, D. & Jacak, J., 11 Apr 2023, In: Analytical Chemistry. 95, 14, p. 6061-6070 10 p.Research output: Contribution to journal › Article › peer-review
Open Access3 Citations (Scopus) -
Segmentation of Pores in Carbon Fiber Reinforced Polymers Using the U-Net Convolutional Neural Network
Yosifov, M., Weinberger, P., Plank, B., Fröhler, B., Höglinger, M., Kastner, J. & Heinzl, C., 11 Oct 2023, In: Acta Polytechnica CTU Proceedings. 2023, 42, p. 87-93 7 p.Research output: Contribution to journal › Article › peer-review
Open Access -
Temperature-Controlled in-situ Tensile Tests of Polymer Tape with Single Particles
Heupl, S., Maurer, J. & Kastner, J., Aug 2023, In: Research and Review Journal of Nondestructive Testing. 1, 1Research output: Contribution to journal › Article › peer-review
-
Thermo-mechanical properties and internal architecture of PI composites for high-pressure hydrogen applications
Pöllinger, A., Koch, T., Krenn, S., Wilde, F., Tolnai, D., Plank, B., Heupl, S., Bernardi, J., Whitmore, K., Langela, M., Seichter, S. & Schöbel, M., 15 Dec 2023, In: Polymer. 289, 126500.Research output: Contribution to journal › Article › peer-review
2 Citations (Scopus) -
Ultrasonic atomization of magnesium alloy AZ61 based on the TIG melting method
Jaros, J., Koutny, D., Klakurkova, L., Gneiger, S. & Senck, S., Nov 2023, In: Journal of Mechanical Science and Technology. 37, 11, p. 5513-5519 7 p.Research output: Contribution to journal › Article › peer-review
-
Uncertainty Unveiled: Revealing the Uncertainty of Distribution Visualization Through Cross Reality
Gall, A., Heim, A., Fröhler, B. & Heinzl, C., 16 Oct 2023, Proceedings - 2023 IEEE International Symposium on Mixed and Augmented Reality Adjunct, ISMAR-Adjunct 2023. Bruder, G., Olivier, A.-H., Cunningham, A., Peng, E. Y., Grubert, J. & Williams, I. (eds.). Institute of Electrical and Electronics Engineers Inc., p. 20-24 5 p. (Proceedings - 2023 IEEE International Symposium on Mixed and Augmented Reality Adjunct, ISMAR-Adjunct 2023).Research output: Chapter in Book/Report/Conference proceedings › Conference contribution › peer-review