Zur Hauptnavigation wechseln Zur Suche wechseln Zum Hauptinhalt wechseln

Design of an optimized Motor/Inverter cooling system for an E - Kart

  • Josep Ferrer Cabezas

    Studienabschlussarbeit: Masterarbeit

    Abstract

    Efficient thermal management is a key challenge in high-performance electric karting, where compact packaging and weight constraints often limit conventional solutions. Current designs rely on liquid cooling, which provides effective heat removal but adds complexity, mass, and potential reliability concerns. This work explores the feasibility of an alternative approach: replacing the liquid system with an air-cooled concept for both the permanent magnet synchronous motor (PMSM) and the inverter of the Rotax E20 electric kart. A combined methodology was applied, integrating analytical heat transfer calculations, computational fluid dynamics (CFD) simulations, and experimental validation on prototype housings. For the motor, analytical models established the required cooling surface, while CFD and bench tests demonstrated that air cooling can approach liquid cooling performance under steady-state and dynamic duty cycle conditions. For the inverter, thermal loss estimation guided the design of a ducted housing, where simulations and validation tests confirmed that optimized airflow and fin geometries enabled sufficient heat dissipation. The proposed air-cooled powertrain concept achieved a notable reduction in system complexity and weight while maintaining thermal performance within acceptable limits. These results establish air cooling as a viable alternative to liquid systems in highperformance karting applications and highlight the potential for further improvements through airflow canalization, fin optimization, and integrated housing designs.
    Datum der Bewilligung2025
    OriginalspracheEnglisch
    Gradverleihende Hochschule
    • FH OÖ
    Betreuer/-inChristian Zehetner (Betreuer*in)

    Studiengang

    • Automotive Mechatronics and Management

    Zitieren

    '