TiAlN and TiAlCN deposition in an industrial PaCVD-plant

D. Heim, R. Hochreiter

Publikation: Beitrag in FachzeitschriftArtikelBegutachtung

55 Zitate (Scopus)


An industrial PaCVD-plant was equipped with an AlQ3-generator. By using Ar, H2, N2, CH4, TiCl4 and AlCl3, TiAlN- and TiAlCN-films could be deposited on hard metal and steel substrates. The plasma was generated by a DC-pulse power supply with frequencies up to 50 kHz. The reactor size was 350 mm in diameter and 900 mm in height. During one batch 1200 indexable inserts could be coated. The growth rates were about 1-3 μm h-1. The deposited films show a fine structure and Cl-concentrations below 3%. The measured critical loads were between 30 and 40 N. Wear test results show an increase in tool life up to several 100% compared with uncoated or TiN-coated tools.

Seiten (von - bis)1553-1556
FachzeitschriftSurface and Coatings Technology
PublikationsstatusVeröffentlicht - Jän. 1998
Extern publiziertJa


Untersuchen Sie die Forschungsthemen von „TiAlN and TiAlCN deposition in an industrial PaCVD-plant“. Zusammen bilden sie einen einzigartigen Fingerprint.