Properties of steelmaking dusts from dry dust separators

Publikation: Beitrag in Buch/Bericht/TagungsbandKonferenzbeitragBegutachtung

1 Zitat (Scopus)

Abstract

During the production of plain carbon steel from hot metal and/or scrap considerable amounts of dust-laden off-gases are produced. In de-dusting of these off-gases considerable amounts of fine grained residues are produced, which have to be stored, transported and handled. Thereby, the flow-related properties of the dusts are of great importance. In this study the mechanical properties of dusts from dry off-gas de-dusting in steelmaking plants were investigated. The mass median diameters of electric arc furnace (EAF) dust, basic oxygen furnace (BOF) primary de-dusting dust and vacuum degassing dust (VD) were in the range of a few micrometer, while it was up to more than 100 μm for the residues from the pre-separators in EAF and BOF de-dusting. The values for the particle density were quite similar for all dusts (approximately 3,800-4,800 kg/m 3 ), but the bulk density of the dusts varied in a wide range (approximately 190-1,900 kg/m 3 ). With respect to the flow relevant parameters - flowability, angle of internal friction, wall friction angle and angle of repose - the investigated dusts can be split into two groups: the coarse residues from the pre-separators, which are characterized by low values for the angles and a good flowability, and all other dusts with higher values for the angles and a flowability in the range of very cohesive to cohesive.

OriginalspracheEnglisch
TitelMETAL 2018 - 27th International Conference on Metallurgy and Materials, Conference Proceedings
Herausgeber (Verlag)TANGER Ltd.
Seiten41-48
Seitenumfang8
ISBN (elektronisch)9788087294840
PublikationsstatusVeröffentlicht - 2018
Veranstaltung27th International Conference on Metallurgy and Materials, METAL 2018 - Brno, Tschechische Republik
Dauer: 23 Mai 201825 Mai 2018

Publikationsreihe

NameMETAL 2018 - 27th International Conference on Metallurgy and Materials, Conference Proceedings

Konferenz

Konferenz27th International Conference on Metallurgy and Materials, METAL 2018
Land/GebietTschechische Republik
OrtBrno
Zeitraum23.05.201825.05.2018

Fingerprint

Untersuchen Sie die Forschungsthemen von „Properties of steelmaking dusts from dry dust separators“. Zusammen bilden sie einen einzigartigen Fingerprint.

Zitieren