Model Based Design of Inductive Components - A Comparision between Measurement and Simulation

Mario Jungwirth; Daniel Hofinger; Alexander Eder

doi:10.1007/978-3-319-27340-2_68

Model Based Design of Inductive Components - A Comparision between Measurement and Simulation

Mario Jungwirth, Daniel Hofinger, Alexander Eder

Publikation: Beitrag in Buch/Bericht/Tagungsband › Konferenzbeitrag › Begutachtung

1 Zitat (Scopus)

Abstract

Inductors are one of the main components in power electronics systems. In order to reduce the time to market of such systems, a computer aided design tool for inductors was developed. This easy to use tool is able to predict the physical behaviour of inductors in operation and enables the designer to optimize all signicant design parameters in a short time. As a best practice design example, a PFC choke in a three-phase PV inverter is investigated. The principle design process and the relevant results are presented. The resulting optimized choke is compared to calorimeter measurements regarding losses.

Originalsprache	Englisch
Titel	Computer Aided Systems Theory – EUROCAST 2015 - 15th International Conference, Revised Selected Papers
Redakteure/-innen	Franz Pichler, Roberto Moreno-Díaz, Alexis Quesada-Arencibia
Herausgeber (Verlag)	Springer
Seiten	546-551
Seitenumfang	6
ISBN (Print)	9783319273396
DOIs	https://doi.org/10.1007/978-3-319-27340-2_68
Publikationsstatus	Veröffentlicht - 2015
Veranstaltung	15th International Conference on Computer Aided Systems Theory, Eurocast 2015 - Las Palmas, Gran Canaria, Spanien Dauer: 8 Feb. 2015 → 13 Feb. 2015 http://eurocast2015.fulp.ulpgc.es/

Publikationsreihe

Name	Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)
Band	9520
ISSN (Print)	0302-9743
ISSN (elektronisch)	1611-3349

Konferenz

Konferenz	15th International Conference on Computer Aided Systems Theory, Eurocast 2015
Land/Gebiet	Spanien
Ort	Las Palmas, Gran Canaria
Zeitraum	08.02.2015 → 13.02.2015
Internetadresse	http://eurocast2015.fulp.ulpgc.es/

Zugriff auf Dokument

10.1007/978-3-319-27340-2_68

Andere Dateien und Links

Link zur Publikation in Scopus

Zitieren

Jungwirth, M., Hofinger, D., & Eder, A. (2015). Model Based Design of Inductive Components - A Comparision between Measurement and Simulation. in F. Pichler, R. Moreno-Díaz, & A. Quesada-Arencibia (Hrsg.), Computer Aided Systems Theory – EUROCAST 2015 - 15th International Conference, Revised Selected Papers (S. 546-551). (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); Band 9520). Springer. https://doi.org/10.1007/978-3-319-27340-2_68

Jungwirth, Mario ; Hofinger, Daniel ; Eder, Alexander. / Model Based Design of Inductive Components - A Comparision between Measurement and Simulation. Computer Aided Systems Theory – EUROCAST 2015 - 15th International Conference, Revised Selected Papers. Hrsg. / Franz Pichler ; Roberto Moreno-Díaz ; Alexis Quesada-Arencibia. Springer, 2015. S. 546-551 (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)).

@inproceedings{1c95ab7b644c453bbf17f4112473b222,

title = "Model Based Design of Inductive Components - A Comparision between Measurement and Simulation",

abstract = "Inductors are one of the main components in power electronics systems. In order to reduce the time to market of such systems, a computer aided design tool for inductors was developed. This easy to use tool is able to predict the physical behaviour of inductors in operation and enables the designer to optimize all signicant design parameters in a short time. As a best practice design example, a PFC choke in a three-phase PV inverter is investigated. The principle design process and the relevant results are presented. The resulting optimized choke is compared to calorimeter measurements regarding losses.",

author = "Mario Jungwirth and Daniel Hofinger and Alexander Eder",

year = "2015",

doi = "10.1007/978-3-319-27340-2_68",

language = "English",

isbn = "9783319273396",

series = "Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)",

publisher = "Springer",

pages = "546--551",

editor = "Franz Pichler and Roberto Moreno-D{\'i}az and Alexis Quesada-Arencibia",

booktitle = "Computer Aided Systems Theory – EUROCAST 2015 - 15th International Conference, Revised Selected Papers",

address = "Germany",

note = "15th International Conference on Computer Aided Systems Theory, Eurocast 2015 ; Conference date: 08-02-2015 Through 13-02-2015",

url = "http://eurocast2015.fulp.ulpgc.es/",

}

Jungwirth, M, Hofinger, D & Eder, A 2015, Model Based Design of Inductive Components - A Comparision between Measurement and Simulation. in F Pichler, R Moreno-Díaz & A Quesada-Arencibia (Hrsg.), Computer Aided Systems Theory – EUROCAST 2015 - 15th International Conference, Revised Selected Papers. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), Bd. 9520, Springer, S. 546-551, 15th International Conference on Computer Aided Systems Theory, Eurocast 2015, Las Palmas, Gran Canaria, Spanien, 08.02.2015. https://doi.org/10.1007/978-3-319-27340-2_68

Model Based Design of Inductive Components - A Comparision between Measurement and Simulation. / Jungwirth, Mario; Hofinger, Daniel; Eder, Alexander.
Computer Aided Systems Theory – EUROCAST 2015 - 15th International Conference, Revised Selected Papers. Hrsg. / Franz Pichler; Roberto Moreno-Díaz; Alexis Quesada-Arencibia. Springer, 2015. S. 546-551 (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); Band 9520).

Publikation: Beitrag in Buch/Bericht/Tagungsband › Konferenzbeitrag › Begutachtung

TY - GEN

T1 - Model Based Design of Inductive Components - A Comparision between Measurement and Simulation

AU - Jungwirth, Mario

AU - Hofinger, Daniel

AU - Eder, Alexander

PY - 2015

Y1 - 2015

N2 - Inductors are one of the main components in power electronics systems. In order to reduce the time to market of such systems, a computer aided design tool for inductors was developed. This easy to use tool is able to predict the physical behaviour of inductors in operation and enables the designer to optimize all signicant design parameters in a short time. As a best practice design example, a PFC choke in a three-phase PV inverter is investigated. The principle design process and the relevant results are presented. The resulting optimized choke is compared to calorimeter measurements regarding losses.

AB - Inductors are one of the main components in power electronics systems. In order to reduce the time to market of such systems, a computer aided design tool for inductors was developed. This easy to use tool is able to predict the physical behaviour of inductors in operation and enables the designer to optimize all signicant design parameters in a short time. As a best practice design example, a PFC choke in a three-phase PV inverter is investigated. The principle design process and the relevant results are presented. The resulting optimized choke is compared to calorimeter measurements regarding losses.

UR - http://www.scopus.com/inward/record.url?scp=84952320490&partnerID=8YFLogxK

U2 - 10.1007/978-3-319-27340-2_68

DO - 10.1007/978-3-319-27340-2_68

M3 - Conference contribution

SN - 9783319273396

T3 - Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)

SP - 546

EP - 551

BT - Computer Aided Systems Theory – EUROCAST 2015 - 15th International Conference, Revised Selected Papers

A2 - Pichler, Franz

A2 - Moreno-Díaz, Roberto

A2 - Quesada-Arencibia, Alexis

PB - Springer

T2 - 15th International Conference on Computer Aided Systems Theory, Eurocast 2015

Y2 - 8 February 2015 through 13 February 2015

ER -

Jungwirth M, Hofinger D, Eder A. Model Based Design of Inductive Components - A Comparision between Measurement and Simulation. in Pichler F, Moreno-Díaz R, Quesada-Arencibia A, Hrsg., Computer Aided Systems Theory – EUROCAST 2015 - 15th International Conference, Revised Selected Papers. Springer. 2015. S. 546-551. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)). doi: 10.1007/978-3-319-27340-2_68

Model Based Design of Inductive Components - A Comparision between Measurement and Simulation

Abstract

Publikationsreihe

Konferenz

Zugriff auf Dokument

Andere Dateien und Links

Fingerprint

Zitieren