Methods for Characterizing the 3-D Morphology of Polymer Composites

Thomas Koch, Dietmar Salaberger

Publikation: Beitrag in FachzeitschriftArtikelBegutachtung

6 Zitate (Scopus)

Abstract

3-dimensional visualization of polymer morphology is of increasing interest in the polymer community because it provides a deeper insight into the arrangement of the phases in heterophasic polymeric materials, for example in composites. Depending on the size of the fillers, an adequate method offering a good compromise between suitable resolution and observable volume must be selected. Different polypropylene composites filled with long glass fibres, mica and talcum particles were investigated. Four methods were applied to account for the different filler sizes. For composites containing fillers larger than several micrometers, i.e. glass fibres and mica particles, X-ray tomography offers a very good combination of visibility and volume. Serial sectioning by polishing in combination with light optical microscopy can be an alternative if no X-ray equipment is available. This combined method has the disadvantage, however, that the imaged volume is smaller and involves more effort, which makes it unsuitable for routine observations. The much smaller talcum particles with thicknesses down to 200 nm were investigated by coupling focused ion beam (FIB) milling and scanning electron microscopy (SEM) and by insitu ultramicrotomy in the SEM. Both methods led to good and comparable results.
OriginalspracheEnglisch
Seiten (von - bis)115-124
Seitenumfang10
FachzeitschriftMacromolecular Symposia
Jahrgang315
Ausgabenummer1
DOIs
PublikationsstatusVeröffentlicht - Mai 2012

Schlagwörter

  • focused ion beam
  • insitu ultramicrotomy
  • polymer composites
  • sectioning
  • X-ray tomography

Fingerprint

Untersuchen Sie die Forschungsthemen von „Methods for Characterizing the 3-D Morphology of Polymer Composites“. Zusammen bilden sie einen einzigartigen Fingerprint.

Zitieren