Investigation of new volumetric non-destructive techniques to characterise additive manufacturing parts

Aziz Huskic; Sascha Senck; Anne-Françoise Obaton; Minh-Quang Lê; Vincent Prezza; David Marlot; Pierre Delvart; Emmanuel Mahé; Charles Cayron

Investigation of new volumetric non-destructive techniques to characterise additive manufacturing parts

Aziz Huskic, Sascha Senck, Anne-Françoise Obaton, Minh-Quang Lê, Vincent Prezza, David Marlot, Pierre Delvart, Emmanuel Mahé, Charles Cayron

Research Center Wels

Publikation: Beitrag in Buch/Bericht/Tagungsband › Konferenzbeitrag

Abstract

The assessment of the potential of various non-destructive methods to characterise additive manufactured dense and lattice parts was investigated. The Archimedes’ and gas pycnometric methods for density measurements of both types of structures are presented as well as the percentage of cells in lattice structures. A multi-frequency eddy current method for electrical conductivity measurements of lattice structures is also presented. Finally, C-scan ultrasound method for the characterisation of dense parts was investigated. The advantages and limitations of each method are underlined.

Originalsprache	Englisch
Titel	WELDING, ADDITIVE MANUFACTURING AND ASSOCIATED NON-DESTRUCTIVE TESTING
Band	62
Auflage	5
Publikationsstatus	Veröffentlicht - 1 Sep. 2018
Veranstaltung	1ST INTERNATIONAL CONGRESS ON WELDING, ADDITIVE MANUFACTURING AND ASSOCIATED NON-DESTRUCTIVE TESTING - Metz Arsenal, Frankreich Dauer: 17 Mai 2017 → 19 Mai 2017

Konferenz

Konferenz	1ST INTERNATIONAL CONGRESS ON WELDING, ADDITIVE MANUFACTURING AND ASSOCIATED NON-DESTRUCTIVE TESTING
Land/Gebiet	Frankreich
Ort	Metz Arsenal
Zeitraum	17.05.2017 → 19.05.2017

Zitieren

@inproceedings{1c7b4a43c5134bcc9efc2ece98b4ddbe,

title = "Investigation of new volumetric non-destructive techniques to characterise additive manufacturing parts",

abstract = "The assessment of the potential of various non-destructive methods to characterise additive manufactured dense and lattice parts was investigated. The Archimedes{\textquoteright} and gas pycnometric methods for density measurements of both types of structures are presented as well as the percentage of cells in lattice structures. A multi-frequency eddy current method for electrical conductivity measurements of lattice structures is also presented. Finally, C-scan ultrasound method for the characterisation of dense parts was investigated. The advantages and limitations of each method are underlined.",

keywords = "Additive manufacturing, Archimedes{\textquoteright} method, C-scan ultrasound method, Gas pycnometric method, Multi-frequency eddy current method, Volumetric non-destructive techniques (NDTs)",

author = "Aziz Huskic and Sascha Senck and Anne-Fran{\c c}oise Obaton and Minh-Quang L{\^e} and Vincent Prezza and David Marlot and Pierre Delvart and Emmanuel Mah{\'e} and Charles Cayron",

year = "2018",

month = sep,

day = "1",

language = "English",

volume = "62",

booktitle = "WELDING, ADDITIVE MANUFACTURING AND ASSOCIATED NON-DESTRUCTIVE TESTING",

edition = "5",

note = " 1ST INTERNATIONAL CONGRESS ON WELDING, ADDITIVE MANUFACTURING AND ASSOCIATED NON-DESTRUCTIVE TESTING ; Conference date: 17-05-2017 Through 19-05-2017",

}

Huskic, A , Senck, S, Obaton, A-F, Lê, M-Q, Prezza, V, Marlot, D, Delvart, P, Mahé, E & Cayron, C 2018, Investigation of new volumetric non-destructive techniques to characterise additive manufacturing parts. in WELDING, ADDITIVE MANUFACTURING AND ASSOCIATED NON-DESTRUCTIVE TESTING. 5 Aufl., Bd. 62, 1ST INTERNATIONAL CONGRESS ON WELDING, ADDITIVE MANUFACTURING AND ASSOCIATED NON-DESTRUCTIVE TESTING, Metz Arsenal, Frankreich, 17.05.2017.

Investigation of new volumetric non-destructive techniques to characterise additive manufacturing parts. / Huskic, Aziz ; Senck, Sascha; Obaton, Anne-Françoise; Lê, Minh-Quang; Prezza, Vincent; Marlot, David; Delvart, Pierre; Mahé, Emmanuel; Cayron, Charles.

WELDING, ADDITIVE MANUFACTURING AND ASSOCIATED NON-DESTRUCTIVE TESTING. Band 62 5. Aufl. 2018.

Publikation: Beitrag in Buch/Bericht/Tagungsband › Konferenzbeitrag

TY - GEN

T1 - Investigation of new volumetric non-destructive techniques to characterise additive manufacturing parts

AU - Huskic, Aziz

AU - Senck, Sascha

AU - Obaton, Anne-Françoise

AU - Lê, Minh-Quang

AU - Prezza, Vincent

AU - Marlot, David

AU - Delvart, Pierre

AU - Mahé, Emmanuel

AU - Cayron, Charles

PY - 2018/9/1

Y1 - 2018/9/1

N2 - The assessment of the potential of various non-destructive methods to characterise additive manufactured dense and lattice parts was investigated. The Archimedes’ and gas pycnometric methods for density measurements of both types of structures are presented as well as the percentage of cells in lattice structures. A multi-frequency eddy current method for electrical conductivity measurements of lattice structures is also presented. Finally, C-scan ultrasound method for the characterisation of dense parts was investigated. The advantages and limitations of each method are underlined.

AB - The assessment of the potential of various non-destructive methods to characterise additive manufactured dense and lattice parts was investigated. The Archimedes’ and gas pycnometric methods for density measurements of both types of structures are presented as well as the percentage of cells in lattice structures. A multi-frequency eddy current method for electrical conductivity measurements of lattice structures is also presented. Finally, C-scan ultrasound method for the characterisation of dense parts was investigated. The advantages and limitations of each method are underlined.

KW - Additive manufacturing

KW - Archimedes’ method

KW - C-scan ultrasound method

KW - Gas pycnometric method

KW - Multi-frequency eddy current method

KW - Volumetric non-destructive techniques (NDTs)

M3 - Conference contribution

VL - 62

BT - WELDING, ADDITIVE MANUFACTURING AND ASSOCIATED NON-DESTRUCTIVE TESTING

T2 - 1ST INTERNATIONAL CONGRESS ON WELDING, ADDITIVE MANUFACTURING AND ASSOCIATED NON-DESTRUCTIVE TESTING

Y2 - 17 May 2017 through 19 May 2017

ER -

Investigation of new volumetric non-destructive techniques to characterise additive manufacturing parts

Abstract

Konferenz

Fingerprint

Zitieren