Compatibilizing immiscible blends from polyethylenes and polyamide using reactive extrusion

Christoph Burgstaller; Carlo Augusto Puppo Bigarella; Bernhard Riedl; Wolfgang Stadlbauer

Compatibilizing immiscible blends from polyethylenes and polyamide using reactive extrusion

Christoph Burgstaller, Carlo Augusto Puppo Bigarella, Bernhard Riedl, Wolfgang Stadlbauer

Research Center Wels

Publikation: Konferenzbeitrag › Papier › Begutachtung

6 Zitate (Scopus)

Abstract

The aim of this work was to investigate the possibilities of compatibilizing immiscible blends of HDPE - PA6 via reactive extrusion. We investigated the influence of the compatibilization on the mechanical and rheological properties, as well as the morphology of the samples was investigated. We found, that it is possible to compatibilize immiscible blends via the in situ production of a compatibilizer from a pre-cursor and a radical generator in the blends. The effectiveness of this method is comparable with the compatibilization via the addition of pre-fabricated, industrially available additives.

Originalsprache	Englisch
Seiten	20-24
Seitenumfang	5
Publikationsstatus	Veröffentlicht - 2014
Veranstaltung	72nd Annual Technical Conference of the Society of Plastics Engineers: The Plastics Conference, ANTEC 2014 - Las Vegas, USA/Vereinigte Staaten Dauer: 28 Apr. 2014 → 30 Apr. 2014

Konferenz

Konferenz	72nd Annual Technical Conference of the Society of Plastics Engineers: The Plastics Conference, ANTEC 2014
Land/Gebiet	USA/Vereinigte Staaten
Ort	Las Vegas
Zeitraum	28.04.2014 → 30.04.2014

Andere Dateien und Links

Link to publication in Scopus

Zitieren

@conference{4388efbf0356417a959db27d15f3db85,

title = "Compatibilizing immiscible blends from polyethylenes and polyamide using reactive extrusion",

abstract = "The aim of this work was to investigate the possibilities of compatibilizing immiscible blends of HDPE - PA6 via reactive extrusion. We investigated the influence of the compatibilization on the mechanical and rheological properties, as well as the morphology of the samples was investigated. We found, that it is possible to compatibilize immiscible blends via the in situ production of a compatibilizer from a pre-cursor and a radical generator in the blends. The effectiveness of this method is comparable with the compatibilization via the addition of pre-fabricated, industrially available additives.",

keywords = "Blends, Compatibilizer, PA6, Polyethylene, Reactive extrusion",

author = "Christoph Burgstaller and Bigarella, {Carlo Augusto Puppo} and Bernhard Riedl and Wolfgang Stadlbauer",

year = "2014",

language = "English",

pages = "20--24",

note = "72nd Annual Technical Conference of the Society of Plastics Engineers: The Plastics Conference, ANTEC 2014 ; Conference date: 28-04-2014 Through 30-04-2014",

}

Compatibilizing immiscible blends from polyethylenes and polyamide using reactive extrusion. / Burgstaller, Christoph; Bigarella, Carlo Augusto Puppo; Riedl, Bernhard et al.
2014. 20-24 Beitrag in 72nd Annual Technical Conference of the Society of Plastics Engineers: The Plastics Conference, ANTEC 2014, Las Vegas, USA/Vereinigte Staaten.

Publikation: Konferenzbeitrag › Papier › Begutachtung

TY - CONF

T1 - Compatibilizing immiscible blends from polyethylenes and polyamide using reactive extrusion

AU - Burgstaller, Christoph

AU - Bigarella, Carlo Augusto Puppo

AU - Riedl, Bernhard

AU - Stadlbauer, Wolfgang

PY - 2014

Y1 - 2014

N2 - The aim of this work was to investigate the possibilities of compatibilizing immiscible blends of HDPE - PA6 via reactive extrusion. We investigated the influence of the compatibilization on the mechanical and rheological properties, as well as the morphology of the samples was investigated. We found, that it is possible to compatibilize immiscible blends via the in situ production of a compatibilizer from a pre-cursor and a radical generator in the blends. The effectiveness of this method is comparable with the compatibilization via the addition of pre-fabricated, industrially available additives.

AB - The aim of this work was to investigate the possibilities of compatibilizing immiscible blends of HDPE - PA6 via reactive extrusion. We investigated the influence of the compatibilization on the mechanical and rheological properties, as well as the morphology of the samples was investigated. We found, that it is possible to compatibilize immiscible blends via the in situ production of a compatibilizer from a pre-cursor and a radical generator in the blends. The effectiveness of this method is comparable with the compatibilization via the addition of pre-fabricated, industrially available additives.

KW - Blends

KW - Compatibilizer

KW - PA6

KW - Polyethylene

KW - Reactive extrusion

UR - http://www.scopus.com/inward/record.url?scp=84938058099&partnerID=8YFLogxK

M3 - Paper

AN - SCOPUS:84938058099

SP - 20

EP - 24

T2 - 72nd Annual Technical Conference of the Society of Plastics Engineers: The Plastics Conference, ANTEC 2014

Y2 - 28 April 2014 through 30 April 2014

ER -

Compatibilizing immiscible blends from polyethylenes and polyamide using reactive extrusion

Abstract

Konferenz

Andere Dateien und Links

Fingerprint

Zitieren