COMPARING LOCAL FIBER ANGLES FROM DRAPING EXPERIMENTS TO SIMULATIONS

Sophia Keller; Franz Maier; Joachim Osterberger; Roland Markus Hinterhölzl

doi:10.5075/epfl-298799_978-2-9701614-0-0

COMPARING LOCAL FIBER ANGLES FROM DRAPING EXPERIMENTS TO SIMULATIONS

Sophia Keller, Franz Maier, Joachim Osterberger, Roland Markus Hinterhölzl

Publikation: Beitrag in Buch/Bericht/Tagungsband › Konferenzbeitrag › Begutachtung

Abstract

The mechanical performance of fiber reinforced composite components strongly depends on the fiber orientation. In order to determine the performance of a part as-built, the deviation of the fiber orientation from the intended configuration (as-designed) is crucial. Within this study, a method to compare local fiber orientations in manufactured components with draping simulation results was developed for unidirectional (UD) carbon laminas. The developed algorithm was tested on a plane plate geometry and a 3D double sine geometry. The resulting fiber angle deviations showed that the method enables a robust way for comparing local fiber orientations of manufactured parts and simulation results.

Originalsprache	Englisch
Titel	Proceedings of the 20th European Conference on Composite Materials
Untertitel	Composites Meet Sustainability
Redakteure/-innen	Anastasios P. Vassilopoulos, Veronique Michaud
Erscheinungsort	Lausanne
Herausgeber (Verlag)	EPFL Lausanne, Composite Construction Laboratory
Seiten	710-717
Seitenumfang	8
Band	Vol 1-6
ISBN (elektronisch)	978-2-9701614-0-0
DOIs	https://doi.org/10.5075/epfl-298799_978-2-9701614-0-0
Publikationsstatus	Veröffentlicht - 2022
Veranstaltung	20th European Conference on Composite Materials (ECCM20): Composites meet Sustainability - EPFL Ecole polytechnique fédérale de Lausanne, Lausanne, Schweiz Dauer: 26 Juni 2022 → 30 Juni 2022 https://eccm20.org

Publikationsreihe

Name	ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability
Band	3

Konferenz

Konferenz	20th European Conference on Composite Materials (ECCM20)
Land/Gebiet	Schweiz
Ort	Lausanne
Zeitraum	26.06.2022 → 30.06.2022
Internetadresse	https://eccm20.org

Zugriff auf Dokument

10.5075/epfl-298799_978-2-9701614-0-0Lizenz: CC BY-NC

https://infoscience.epfl.ch/record/298799?ln=enLizenz: CC BY-NC

Andere Dateien und Links

Link zur Publikation in Scopus

Zitieren

Keller, S., Maier, F., Osterberger, J., & Hinterhölzl, R. M. (2022). COMPARING LOCAL FIBER ANGLES FROM DRAPING EXPERIMENTS TO SIMULATIONS. in A. P. Vassilopoulos, & V. Michaud (Hrsg.), Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability (Band Vol 1-6, S. 710-717). (ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability; Band 3). EPFL Lausanne, Composite Construction Laboratory. https://doi.org/10.5075/epfl-298799_978-2-9701614-0-0

Keller, Sophia ; Maier, Franz ; Osterberger, Joachim et al. / COMPARING LOCAL FIBER ANGLES FROM DRAPING EXPERIMENTS TO SIMULATIONS. Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability . Hrsg. / Anastasios P. Vassilopoulos ; Veronique Michaud. Band Vol 1-6 Lausanne : EPFL Lausanne, Composite Construction Laboratory, 2022. S. 710-717 (ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability).

@inproceedings{e0aa6a293c31462699a70c1ac700b9ec,

title = "COMPARING LOCAL FIBER ANGLES FROM DRAPING EXPERIMENTS TO SIMULATIONS",

abstract = "The mechanical performance of fiber reinforced composite components strongly depends on the fiber orientation. In order to determine the performance of a part as-built, the deviation of the fiber orientation from the intended configuration (as-designed) is crucial. Within this study, a method to compare local fiber orientations in manufactured components with draping simulation results was developed for unidirectional (UD) carbon laminas. The developed algorithm was tested on a plane plate geometry and a 3D double sine geometry. The resulting fiber angle deviations showed that the method enables a robust way for comparing local fiber orientations of manufactured parts and simulation results.",

keywords = "carbon fiber reinforced plastics, draping simulation, fiber angle measurements, fiber orientations, process simulation",

author = "Sophia Keller and Franz Maier and Joachim Osterberger and Hinterh{\"o}lzl, \{Roland Markus\}",

note = "Funding Information: We gratefully acknowledge the financial support of the Austrian Research Promotion Agency (FFG) under the 7th “Coin?Aufbau”?Program?in?the?scope?of?the?project?ProSim?(Grant?No.? 866878). Publisher Copyright: {\textcopyright} 2022 Keller et al.; 20th European Conference on Composite Materials (ECCM20) ; Conference date: 26-06-2022 Through 30-06-2022",

year = "2022",

doi = "10.5075/epfl-298799\_978-2-9701614-0-0",

language = "English",

volume = "Vol 1-6",

series = "ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability",

publisher = "EPFL Lausanne, Composite Construction Laboratory",

pages = "710--717",

editor = "Vassilopoulos, \{Anastasios P.\} and Veronique Michaud",

booktitle = "Proceedings of the 20th European Conference on Composite Materials",

url = "https://eccm20.org",

}

Keller, S , Maier, F, Osterberger, J & Hinterhölzl, RM 2022, COMPARING LOCAL FIBER ANGLES FROM DRAPING EXPERIMENTS TO SIMULATIONS. in AP Vassilopoulos & V Michaud (Hrsg.), Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability . Bd. Vol 1-6, ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability, Bd. 3, EPFL Lausanne, Composite Construction Laboratory, Lausanne, S. 710-717, 20th European Conference on Composite Materials (ECCM20), Lausanne, Schweiz, 26.06.2022. https://doi.org/10.5075/epfl-298799_978-2-9701614-0-0

COMPARING LOCAL FIBER ANGLES FROM DRAPING EXPERIMENTS TO SIMULATIONS. / Keller, Sophia ; Maier, Franz; Osterberger, Joachim et al.
Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability . Hrsg. / Anastasios P. Vassilopoulos; Veronique Michaud. Band Vol 1-6 Lausanne: EPFL Lausanne, Composite Construction Laboratory, 2022. S. 710-717 (ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability; Band 3).

Publikation: Beitrag in Buch/Bericht/Tagungsband › Konferenzbeitrag › Begutachtung

TY - GEN

T1 - COMPARING LOCAL FIBER ANGLES FROM DRAPING EXPERIMENTS TO SIMULATIONS

AU - Keller, Sophia

AU - Maier, Franz

AU - Osterberger, Joachim

AU - Hinterhölzl, Roland Markus

N1 - Funding Information: We gratefully acknowledge the financial support of the Austrian Research Promotion Agency (FFG) under the 7th “Coin?Aufbau”?Program?in?the?scope?of?the?project?ProSim?(Grant?No.? 866878). Publisher Copyright: © 2022 Keller et al.

PY - 2022

Y1 - 2022

N2 - The mechanical performance of fiber reinforced composite components strongly depends on the fiber orientation. In order to determine the performance of a part as-built, the deviation of the fiber orientation from the intended configuration (as-designed) is crucial. Within this study, a method to compare local fiber orientations in manufactured components with draping simulation results was developed for unidirectional (UD) carbon laminas. The developed algorithm was tested on a plane plate geometry and a 3D double sine geometry. The resulting fiber angle deviations showed that the method enables a robust way for comparing local fiber orientations of manufactured parts and simulation results.

AB - The mechanical performance of fiber reinforced composite components strongly depends on the fiber orientation. In order to determine the performance of a part as-built, the deviation of the fiber orientation from the intended configuration (as-designed) is crucial. Within this study, a method to compare local fiber orientations in manufactured components with draping simulation results was developed for unidirectional (UD) carbon laminas. The developed algorithm was tested on a plane plate geometry and a 3D double sine geometry. The resulting fiber angle deviations showed that the method enables a robust way for comparing local fiber orientations of manufactured parts and simulation results.

KW - carbon fiber reinforced plastics

KW - draping simulation

KW - fiber angle measurements

KW - fiber orientations

KW - process simulation

UR - http://www.scopus.com/inward/record.url?scp=85149168358&partnerID=8YFLogxK

U2 - 10.5075/epfl-298799_978-2-9701614-0-0

DO - 10.5075/epfl-298799_978-2-9701614-0-0

M3 - Conference contribution

VL - Vol 1-6

T3 - ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability

SP - 710

EP - 717

BT - Proceedings of the 20th European Conference on Composite Materials

A2 - Vassilopoulos, Anastasios P.

A2 - Michaud, Veronique

PB - EPFL Lausanne, Composite Construction Laboratory

CY - Lausanne

T2 - 20th European Conference on Composite Materials (ECCM20)

Y2 - 26 June 2022 through 30 June 2022

ER -

Keller S , Maier F, Osterberger J, Hinterhölzl RM. COMPARING LOCAL FIBER ANGLES FROM DRAPING EXPERIMENTS TO SIMULATIONS. in Vassilopoulos AP, Michaud V, Hrsg., Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability . Band Vol 1-6. Lausanne: EPFL Lausanne, Composite Construction Laboratory. 2022. S. 710-717. (ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability). doi: 10.5075/epfl-298799_978-2-9701614-0-0