Assessment of the effects of the addition of continuous fiber filaments in PA 6/short fiber 3D-printed components using interrupted in-situ x-ray CT tensile testing

Keyphrases

• Tensile Test 100%
• Continuous Fiber 100%
• PA 6 100%
• Short Fiber 100%
• In Situ Imaging 100%
• 3D-printed Components 100%
• Fused Filament Fabrication 50%
• Onyx 50%
• Fiber Layer 50%
• Computed Tomography 25%
• Short Carbon Fiber 25%
• Tensile Strength 25%
• Fabrication Methods 25%
• Geometric Complexity 25%
• Mechanical Performance 25%
• Failure Mode 25%
• Fiber Waviness 25%
• Reinforced 25%
• Prepreg 25%
• Manufacturing Defects 25%
• Printing Process 25%
• Process Outputs 25%
• Continuous Carbon Fiber 25%
• Fibre Misalignment 25%
• Additive Manufacturing Method 25%
• In Situ Techniques 25%
• Reinforced Layer 25%
• Short Fibre Thermoplastics 25%
• Low Tensile Strength 25%
• Test Execution 25%
• Local Failure 25%
• Thermoplastic Filaments 25%
• Hybrid Composite Structure 25%
• Failure Damage 25%

Material Science

• Carbon Fiber 100%
• Ultimate Tensile Strength 100%
• Tensile Testing 100%
• Fused Filament Fabrication 100%
• Tomography 50%
• Thermoplastics 50%
• Three Dimensional Printing 50%
• Composite Material 50%
• Prepreg 50%
• Glass Fiber 50%

Engineering

• Tensile Testing 100%
• Continuous Fiber 100%
• Short Fiber 100%
• Ultimate Tensile Strength 25%
• Additive Manufacturing 25%
• Mechanical Performance 25%
• Tensile Test 25%
• Failure Mode 25%
• Final Product 25%
• Printing Process 25%
• Reinforced Sample 25%
• Process Output 25%
• Local Failure 25%
• Low Tensile Strength 25%
• Filament Fibre 25%
• Hybrid Composite 25%
• Composite Structure 25%