Publikationen pro Jahr
Publikationen pro Jahr
- 49 Ergebnisse
Suchergebnisse
-
2025
Multivariate interpolation and machine learning models for extreme defects-based fatigue life prediction of Ti6Al4V specimens fabricated by SLM
Horňas, J., Materna, A., Glinz, J., Yosifov, M. & Senck, S., 7 Feb. 2025, in: Engineering Fracture Mechanics. 314, 110756.Publikation: Beitrag in Fachzeitschrift › Artikel › Begutachtung
-
2024
A comparison of X-ray attenuation, differential phase, and dark-field contrast imaging for the detection of porosity in carbon fiber reinforced cyanate ester
Glinz, J., Plank, B., Gutekunst, J., Scheerer, M., Zabler, S., Kastner, J. & Senck, S., 15 Juli 2024, in: NDT and E International. 2024, 147, 9 S., 103194.Publikation: Beitrag in Fachzeitschrift › Artikel › Begutachtung
Open Access1 Zitat (Scopus) -
Anomaly detection by X-ray tomography and probabilistic fatigue assessment of aluminum brackets manufactured by PBF-LB
Titel in Übersetzung :Erkennung von Anomalien mittels Röntgen-Comptertomographie und probabilistische Ermüdungsbewertung von additiv-gefertigten Aluminium-Bauteilen Publikation: Beitrag in Fachzeitschrift › Artikel › Begutachtung
Open Access -
Assessment of the effects of the addition of continuous fiber filaments in PA 6/short fiber 3D-printed components using interrupted in-situ x-ray CT tensile testing
Stamopoulos, A. G., Glinz, J. & Senck, S., Mai 2024, in: Engineering Failure Analysis. 159, S. 1-15 15 S., 108121.Publikation: Beitrag in Fachzeitschrift › Artikel › Begutachtung
6 Zitate (Scopus) -
Ceramic additive manufacturing and microstructural analysis of tricalcium phosphate implants using X-ray microcomputed tomography
Senck, S., Glinz, J., Heupl, S., Kastner, J., Trieb, K., Scheithauer, U., Dahl, S. S. & Jensen, M. B., Sep. 2024, in: Open Ceramics. 19, S. 1-9 9 S., 100628.Publikation: Beitrag in Fachzeitschrift › Artikel › Begutachtung
Open Access1 Zitat (Scopus) -
Influence of Process Energy on the Formation of Imperfections in Body-Centered Cubic Cells with Struts in the Vertical Orientation Produced by Laser Powder Bed Fusion from the Magnesium Alloy WE43
Jaroš, J., Vaverka, O., Senck, S. & Koutný, D., Feb. 2024, in: Micromachines. 15, 2, S. 1 16 S., 278.Publikation: Beitrag in Fachzeitschrift › Artikel › Begutachtung
Open Access -
Investigation of complex single-walled intersecting structures fabricated by wire-arc directed energy deposition
Silmbroth, M., Enzinger, N., Senck, S., Radlmayr, K. & Klein, T., 27 Aug. 2024, in: Rapid Prototyping Journal. 30, 8, S. 1707-1716 10 S.Publikation: Beitrag in Fachzeitschrift › Artikel › Begutachtung
-
Three-Dimensional Osseointegration Patterns of Cementless Femoral Stems: An ex Vivo Study with High-Resolution Imaging and Histological Evaluation
Schwarz, G. M., Synek, A., Senck, S., Kandathil, S. A., Holzleitner, M., Trieb, K., Huber, S., Pahr, D., Hofstaetter, J. G. & Hirtler, L., 5 Juni 2024, in: Journal of Bone and Joint Surgery. 106, 11, S. 941-949 9 S.Publikation: Beitrag in Fachzeitschrift › Artikel › Begutachtung
-
Toward high-resolution 3D-printing of pharmaceutical implants – A holistic analysis of relevant material properties and process parameters
Brandl, B., Eder, S., Palanisamy, A., Heupl, S., Terzic, I., Katschnig, M., Nguyen, T., Senck, S., Roblegg, E. & Spoerk, M., 20 Juli 2024, in: International Journal of Pharmaceutics. 660, S. 124356 13 S., 124356.Publikation: Beitrag in Fachzeitschrift › Artikel › Begutachtung
Open Access3 Zitate (Scopus) -
Unsupervised Segmentation of Industrial X-ray Computed Tomography Data with the Segment Anything Model
Weinberger, P., Schwarz, L., Fröhler, B., Gall, A., Heim, A., Yosifov, M., Bodenhofer, U., Kastner, J. & Senck, S., 1 Jän. 2024, (Eingereicht) in: Journal of Nondestructive Evaluation. 1 S.Publikation: Beitrag in Fachzeitschrift › Artikel › Begutachtung
-
2023
Additive manufacturing based bellows
Bonvoisin, B., Brandao, A., Hatzenbichler, M., Scheerer, M., Simon, Z., Senck, S. & Ghidini, T., Jän. 2023, in: CEAS Space Journal. 15, 1, S. 27-35 9 S.Publikation: Beitrag in Fachzeitschrift › Artikel › Begutachtung
-
A machine learning based approach with an augmented dataset for fatigue life prediction of additively manufactured Ti-6Al-4V samples
Horňas, J., Běhal, J., Homola, P., Doubrava, R., Holzleitner, M. & Senck, S., 1 Dez. 2023, in: Engineering Fracture Mechanics. 293, S. 1 19 S., 109709.Publikation: Beitrag in Fachzeitschrift › Artikel › Begutachtung
Open Access14 Zitate (Scopus) -
Analysis of the Manufacturing Porosity in Fused Filament Fabricated Onyx/Long Fiber Reinforced Composites Using X-Ray Computed Tomography
Pace, F., Stamopoulos, A. G., Eckl, M., Senck, S. & Glinz, J., Sep. 2023, in: Journal of Nondestructive Evaluation. 18 S., 86.Publikation: Beitrag in Fachzeitschrift › Artikel › Begutachtung
6 Zitate (Scopus) -
Fast Continuous In-Situ XCT of Additively Manufactured Carbon Fiber Reinforced Tensile Test Specimens
Glinz, J., Maurer, J., Holzleitner, M., Pace, F., Stamopoulos, A. G., Vopálenský, M., Kumpová, I., Eckl, M., Kastner, J. & Senck, S., 11 Okt. 2023, in: Acta Polytechnica CTU Proceedings. S. 22-26 5 S.Publikation: Beitrag in Fachzeitschrift › Artikel › Begutachtung
Open Access2 Zitate (Scopus) -
Modelling fatigue life prediction of additively manufactured Ti-6Al-4V samples using machine learning approach
Horňas, J., Běhal, J., Homola, P., Senck, S., Holzleitner, M., Godja, N., Pásztor, Z., Hegedüs, B., Doubrava, R., Růžek, R. & Petrusová, L., Apr. 2023, in: International Journal of Fatigue. 169, 107483.Publikation: Beitrag in Fachzeitschrift › Artikel › Begutachtung
Open Access43 Zitate (Scopus) -
Non-destructive evaluation of patient-specific, additively manufactured titanium foot implants using microcomputed tomography
Holzleitner, M., Happl, M., Hubmann, R., Godja, N., Kastner, J., Trieb, K. & Senck, S., März 2023, in: e-Journal of Nondestructive Testing. 28, 3Publikation: Beitrag in Fachzeitschrift › Artikel
-
Processing of AZ91D Magnesium Alloy by Laser Powder Bed Fusion
Nopová, K., Jaroš, J., Červinek, O., Pantělejev, L., Gneiger, S., Senck, S. & Koutný, D., Feb. 2023, in: Applied Sciences (Switzerland). 13, 3, 1377.Publikation: Beitrag in Fachzeitschrift › Artikel › Begutachtung
Open Access10 Zitate (Scopus) -
Ultrasonic atomization of magnesium alloy AZ61 based on the TIG melting method
Jaros, J., Koutny, D., Klakurkova, L., Gneiger, S. & Senck, S., Nov. 2023, in: Journal of Mechanical Science and Technology. 37, 11, S. 5513-5519 7 S.Publikation: Beitrag in Fachzeitschrift › Artikel › Begutachtung
-
Wire Arc Additive Manufacturing (WAAM) and microstructural analysis of Magnesium parts
Senck, S., Holzleitner, M., Glinz, J., Miloradovic, A., Kastner, J., Koutny, D. & Gneiger, S., März 2023, in: e-Journal of Nondestructive Testing. 28, 3Publikation: Beitrag in Fachzeitschrift › Artikel
-
2022
Evaluation of temperature of a full ceramic total knee arthroplasty during MRI examinations
Trieb, K., Artmann, A., Krupa, M., Senck, S. & Landauer, F., 30 Sep. 2022, in: Medicine (United States). 101, 39, S. e30685Publikation: Beitrag in Fachzeitschrift › Artikel › Begutachtung
Open Access1 Zitat (Scopus) -
Mechanical compensation in the evolution of the early hominin feeding apparatus
Titel in Übersetzung :Mechanische Kompensation in der Evolution des mastikatorischen Apparats der frühen Homininen Publikation: Beitrag in Fachzeitschrift › Artikel › Begutachtung
Open Access2 Zitate (Scopus) -
Metal Artifacts in Attenuation and Phase Contrast X-Ray Microcomputed Tomography: A Comparative Study
Glinz, J., Zabler, S., Kastner, J. & Senck, S., Juni 2022, in: Experimental Mechanics. 62, 5, S. 837-847 11 S.Publikation: Beitrag in Fachzeitschrift › Artikel › Begutachtung
Open Access8 Zitate (Scopus) -
Non-destructive characterisation of out-of-plane fibre waviness in carbon fibre reinforced polymers by X-ray dark-field radiography
Glinz, J., Thor, M., Schulz, J., Zabler, S., Kastner, J. & Senck, S., 2022, in: Nondestructive Testing and Evaluation. 37, 5, S. 497-507 11 S.Publikation: Beitrag in Fachzeitschrift › Artikel › Begutachtung
Open AccessDatei12 Zitate (Scopus)41 Downloads (Pure) -
2021
Comparative Evaluation of Characterization Methods for Powders Used in Additive Manufacturing
Mitterlehner, M., Danninger, H., Gierl-Mayer, C., Gschiel, H., Martinez, C., Tomisser, M., Schatz, M., Senck, S., Auer, J. & Benigni, C., Sep. 2021, in: Journal of Materials Engineering and Performance. 30, 9, S. 7019-7034 16 S.Publikation: Beitrag in Fachzeitschrift › Artikel › Begutachtung
Open Access11 Zitate (Scopus) -
Investigation of opening eye defects and effects of different ripening profiles on eye structure in semi-hard cheese using X-ray micro-computed tomography
Auer, J., Reiter, M., Senck, S., Reiter, A., Kastner, J. & Mathmann, K., Apr. 2021, in: Food Structure. 28, 100190.Publikation: Beitrag in Fachzeitschrift › Artikel › Begutachtung
Open Access5 Zitate (Scopus) -
Load-induced regulation of tendon homeostasis by SPARC, a genetic predisposition factor for tendon and ligament injuries
Wang, T., Wagner, A., Gehwolf, R., Yan, W., Passini, F. S., Thien, C., Weissenbacher, N., Lin, Z., Lehner, C., Teng, H., Wittner, C., Zheng, Q., Dai, J., Ni, M., Wang, A., Papadimitriou, J., Leys, T., Tuan, R. S., Senck, S. & Snedeker, J. G. &4 mehr, , 24 Feb. 2021, in: Science Translational Medicine. 13, 582, eabe5738.Publikation: Beitrag in Fachzeitschrift › Artikel › Begutachtung
25 Zitate (Scopus) -
Phase-contrast and dark-field imaging for the inspection of resin-rich areas and fiber orientation in non-crimp vacuum infusion carbon-fiber-reinforced polymers
Glinz, J., Šleichrt, J., Kytýř, D., Ayalur-Karunakaran, S., Zabler, S., Kastner, J. & Senck, S., Feb. 2021, in: Journal of Materials Science. 56, 16, S. 9712-9727 16 S.Publikation: Beitrag in Fachzeitschrift › Artikel › Begutachtung
Open Access15 Zitate (Scopus) -
Thickness accuracy of virtually designed patient-specific implants for large neurocranial defects
Wittner, C., Borowski, M., Pirl, L., Kastner, J., Schrempf, A., Schäfer, U., Trieb, K. & Senck, S., Okt. 2021, in: Journal of Anatomy. 239, 4, S. 755-770 16 S.Publikation: Beitrag in Fachzeitschrift › Artikel › Begutachtung
Open Access7 Zitate (Scopus) -
2020
Additive manufacturing and non-destructive testing of topology-optimised aluminium components
Senck, S., Happl, M., Reiter, M., Scheerer, M., Kendel, M., Glinz, J. & Kastner, J., 2 Juli 2020, in: Nondestructive Testing and Evaluation. 35, 3, S. 315-327 13 S.Publikation: Beitrag in Fachzeitschrift › Artikel › Begutachtung
Open Access38 Zitate (Scopus) -
Visualization of intervertebral disc degeneration in a cadaveric human lumbar spine using microcomputed tomography
Senck, S., Trieb, K., Kastner, J., Hofstaetter, S. G., Lugmayr, H. & Windisch, G., 1 Feb. 2020, in: Journal of Anatomy. 236, 2, S. 243-251 9 S.Publikation: Beitrag in Fachzeitschrift › Artikel › Begutachtung
Open Access14 Zitate (Scopus) -
2019
Challenges for grating interferometer X-ray computed tomography for practical applications in industry
Kastner, J., Gusenbauer, C., Plank, B., Glinz, J. & Senck, S., März 2019, in: Insight: Non-Destructive Testing and Condition Monitoring. 61, 3, S. 149-152 4 S.Publikation: Beitrag in Fachzeitschrift › Artikel › Begutachtung
5 Zitate (Scopus) -
Non-Destructive Testing of Ceramic Knee Implants Using Micro-Computed Tomography
Trieb, K., Glinz, J., Reiter, M., Kastner, J. & Senck, S., Sep. 2019, in: The Journal of Arthroplasty. 34, 9, S. 2111-2117 7 S.Publikation: Beitrag in Fachzeitschrift › Artikel › Begutachtung
14 Zitate (Scopus) -
Porosity determination of carbon and glass fibre reinforced polymers using phase-contrast imaging
Gusenbauer, C., Reiter, M., Plank, B., Salaberger, D., Senck, S. & Kastner, J., März 2019, in: Journal of Nondestructive Evaluation. 38, 1, S. 1-10 1.Publikation: Beitrag in Fachzeitschrift › Artikel › Begutachtung
Open Access20 Zitate (Scopus) -
2018
Deformation analysis of the spongious sample in simulated physiological conditions based on in-situ compression, 4D computed tomography and fast readout detector
Fíla, T., Šleichrt, J., Kytýř, D., Kumpová, I., Zlámal, P., Rada, V., Vavřík, D., Koudelka, P., Kulawiecova, K. & Senck, S., 28 Nov. 2018, in: Journal of Instrumentation. 13, 11, S. 1-8 C11021.Publikation: Beitrag in Fachzeitschrift › Artikel › Begutachtung
18 Zitate (Scopus) -
Immunological and morphological analysis of heterotopic ossification differs to healthy controls
Trieb, K., Meryk, A., Senck, S., Naismith, E. & Grubeck-Loebenstein, B., 11 Sep. 2018, in: BMC Musculoskeletal Disorders. 19, 1, S. 1-7 327.Publikation: Beitrag in Fachzeitschrift › Artikel › Begutachtung
Open Access3 Zitate (Scopus) -
Investigation of new volumetric non-destructive techniques to characterise additive manufacturing parts
Obaton, A.-F., Lê, M.-Q., Prezza, V., Marlot, D., Delvart, P., Huskic, A., Senck, S., Mahé, E. & Cayron, C., 1 Sep. 2018, in: Welding in the World. 62, 5, S. 1049-1057 9 S.Publikation: Beitrag in Fachzeitschrift › Artikel
Open Access28 Zitate (Scopus) -
Microcrack characterization in loaded CFRP laminates using quantitative two- and three-dimensional X-ray dark-field imaging
Senck, S., Scheerer, M., Revol, V., Plank, B., Hannesschläger, C., Gusenbauer, C. & Kastner, J., Dez. 2018, in: COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING. 115, S. 206-214 9 S.Publikation: Beitrag in Fachzeitschrift › Artikel
49 Zitate (Scopus) -
Water vapour diffusion resistance of larch (Larix decidua) bark insulation panels and application considerations based on numeric modelling
Kain, G., Lienbacher, B., Barbu, M. C., Senck, S. & Petutschnigg, A., 10 März 2018, in: Construction and Building Materials. 164, S. 308-316 9 S.Publikation: Beitrag in Fachzeitschrift › Artikel › Begutachtung
16 Zitate (Scopus) -
2017
Characterization of synthetic foam structures used to manufacture artificial vertebral trabecular bone
Fürst, D., Senck, S., Hollensteiner, M., Esterer, B., Augat, P., Eckstein, F. & Schrempf, A., 1 Juli 2017, in: Materials Science and Engineering C. 76, S. 1103-1111 9 S.Publikation: Beitrag in Fachzeitschrift › Artikel › Begutachtung
12 Zitate (Scopus) -
Nondestructive characterization of fiber orientation in short fiber reinforced polymer composites with X-ray vector radiography
Prade, F., Schaff, F., Senck, S., Kastner, J. & Pfeiffer, F., 1 März 2017, in: NDT & E INTERNATIONAL. 86, S. 65-72 8 S.Publikation: Beitrag in Fachzeitschrift › Artikel › Begutachtung
56 Zitate (Scopus) -
2016
A reassessment of the presumed Torrener Bärenhöhle's Paleolithic human tooth
Margherita, C., Sahra, T., Wiltschke-Schrotta, K., Senck, S., Oxilia, G., Sorrentino, R., Mancuso, G., Gruppioni, G., Lindner, R., Hublin, J.-J. & Benazzi, S., 1 Apr. 2016, in: Journal of Human Evolution. 93, 1, S. 120-125 6 S.Publikation: Beitrag in Fachzeitschrift › Artikel › Begutachtung
9 Zitate (Scopus) -
Characterization of medical and biological samples with a Talbot–Lau grating interferometer μXCT in comparison to reference methods
Gusenbauer, C., Leiss-Holzinger, E., Senck, S., Mathmann, K., Kastner, J., Hunger, S. & Birkfellner, W., 1 Nov. 2016, in: Case Studies in Nondestructive Testing and Evaluation. 6, S. 30-38 9 S.Publikation: Beitrag in Fachzeitschrift › Artikel › Begutachtung
Open Access16 Zitate (Scopus) -
2015
Morphological Integration and Variation in Facial Orientation in Pongo pygmaeus pygmaeus: A Geometric Morphometric Approach via Partial Least Squares
Senck, S. & Coquerelle, M., 25 Juni 2015, in: International Journal of Primatology. 36, 3, S. 489-512 24 S.Publikation: Beitrag in Fachzeitschrift › Artikel › Begutachtung
10 Zitate (Scopus) -
Virtual Reconstruction of Modern and Fossil Hominoid Crania: Consequences of Reference Sample Choice
Senck, S., Bookstein, F. L., Benazzi, S., Kastner, J. & Weber, G. W., 1 Mai 2015, in: The Anatomical Record. 298, 5, S. 827-841 15 S.Publikation: Beitrag in Fachzeitschrift › Artikel › Begutachtung
Open Access20 Zitate (Scopus) -
Visualisierung lokaler kortikaler Defekte im Charcot-Fuß mittels Mikrocomputertomographie
Senck, S., Plank, B., Kastner, J., Ramadani, F., Trieb, K. & Hofstaetter, S. G., Jän. 2015, in: Orthopade. 44, 1, S. 8-13 6 S.Publikation: Beitrag in Fachzeitschrift › Artikel › Begutachtung
2 Zitate (Scopus) -
2013
Infant growth patterns of the mandible in modern humans: A closer exploration of the developmental interactions between the symphyseal bone, the teeth, and the suprahyoid and tongue muscle insertion sites
Coquerelle, M., Prados-Frutos, J. C., Benazzi, S., Bookstein, F. L., Senck, S., Mitteroecker, P. & Weber, G. W., Feb. 2013, in: Journal of Anatomy. 222, 2, S. 178-192 15 S.Publikation: Beitrag in Fachzeitschrift › Artikel › Begutachtung
30 Zitate (Scopus) -
Virtual Reconstruction of Very Large Skull Defects Featuring Partly and Completely Missing Midsagittal Planes
Senck, S., Coquerelle, M., Weber, G. W. & Benazzi, S., Mai 2013, in: Anatomical Record. 296, 5, S. 745-758 14 S.Publikation: Beitrag in Fachzeitschrift › Artikel › Begutachtung
Open Access19 Zitate (Scopus) -
2011
Comparing 3-dimensional virtual methods for reconstruction in craniomaxillofacial surgery
Benazzi, S. & Senck, S., Apr. 2011, in: Journal of Oral and Maxillofacial Surgery. 69, 4, S. 1184-1194 11 S.Publikation: Beitrag in Fachzeitschrift › Artikel › Begutachtung
36 Zitate (Scopus) -
Virtual assessment of the endocranial morphology of the early modern European fossil calvaria from Cioclovina, Romania
Kranioti, E. F., Holloway, R., Senck, S., Ciprut, T., Grigorescu, D. & Harvati, K., Juli 2011, in: Anatomical Record. 294, 7, S. 1083-1092 10 S.Publikation: Beitrag in Fachzeitschrift › Artikel › Begutachtung
Open Access18 Zitate (Scopus)